Flexcut Hip Knife
KN30
The Flexcut Hip Knife is a versatile fine cutting tool that is capable of a wide range of woodcarving projects. Its high-carbon steel blade is precision machined and honed ready for use. The knife is supplied in a real leather sheath that easily attaches to your belt.
Key Features
A very versatile cutting knife from Flexcut
Flexcut tools are supplied honed and ready for use
Supplied with...
Four Piece Carving Knife Set
KN100
The Flexcut 4-Piece Carving Knife Set contains four knives and a convenient 4-Pocket Knife Roll. The ergonmic handles let you carve longer without hand fatigue. Knives are honed, polished, and razor-sharp, right out of the package.
Includes 1 of each:
KN12 - Cutting Knife
KN13 - Detail Knife
KN18 - Pelican Knife
KN19 - Mini Pelican Knife
Tool Roll
Hook Knife
HOOKKNIFE
The Flexcut Hook Knife blade is curved, similar to a gouge, for working in hollows with ease and fast stock removal.
Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself.
Blade Bevel Length: 7/8"
3mm Left-Handed Scorp
KNL21
KNL21 1/8" (3mm) Left-Handed Scorp
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Left-Handed carvers should choose a left-handed tool to cut towards yourself. Choose a right-handed tool to cut away from...
Three Piece Chip Carving Set
KN115
The Flexcut Chip Carving Set is everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the chip carving craft. Lettering is also very much part of the art form - carving the name of somebody special on the boxes, address blocks, wall plaques and other objects you make, turns them into very personal keepsakes that can be cherished and even handed down generation...
Whittler's Kit
KN300
Put on your Stetson, think of a tune to whistle, find yourself a comfortable chair in the sunshine and while away the hours with this perfect pair of knives for the whittling enthusiast.
Kit contains
KN12 - Cutting Knife
KN27 - Mini Detail Knife
A block of sharpening compound to help maintain a razor edge.
Detail Knife Set
KN400
Flexcut have put together the perfect package to get you started in carving with knives.
These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use.
The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.
Set includes:
KN12 - Cutting Knife
KN13 - Detail Knife
KN14 - Roughing Knife
a...
Three Piece Knife Starter Set
KN500
Three of Flexcut's most popular knives in one, Three-Knife Starter Set.
These knives are made with the same edge-holding steel as our gouges and chisels. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue. Polishing Compound is included with the set to maintain your razor-sharp knives.
The set contains
KN20 - Mini Chip Knife
KN27 - Mini...
Beginner Palm and Knife Set
KN600
The Flexcut beginner palm and knife set is a great way to get started in this rewarding craft. It includes the most popular palm tools and knives from the Flexcut range. Each tool is supplied razor sharp and ready to use.
Set includes KN12 Cutting Knife, KN13 Detail Knife, FR307 V Tool and FR306 Gouge.
Deluxe Woodcarving Starter Set
SK108
A complete carving set all in one box. Suitable for mallet, palm or knife carving. Includes a sharpening SlipStrop and compound for honing your tools to a razor edge.
Woodcarvers Set
SK10
Set interchangeable carving tools with a standard interchangeable handle in a handy safety pouch.
Beginner Craft Carver Set
SK111
Carving tutor Peter Berry designed and developed this package for Flexcut and thoroughly recommends the kit as an ideal introduction to the fascinating craft of woodcarving.
It's supplied with two interchangeable carving blades together with an ABS handle so that as you gain experience, additions could easily be made from the extensive range of Flexcut SK blades.
A bassword blank for leaf...
Skew Knife
KN11
Carving Knives with long lasting Flexcut razor edge. The comfortable carved handle allows for long periods of carving without hand fatigue.
Cutting Knife
KN12
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN12 Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. A great beginners knife, 28mm blade length. The comfortable carved handle allows for long periods of carving without fatigue.
Detail Knife
KN13
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels.
The KN13 Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 38mm blade can accommodate larger stock removal if needed. The comfortable carved handle allows for long periods of carving without fatigue.
Roughing Knife
KN14
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. It features a straight 2" blade for heavier stock removal, with a rounded durable point.
Chip Carving Knife
KN15
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. This traditional chip carving knife is honed, polished and ready to carve. The comfortable carved handle allows for long periods of carving without fatigue.
Scorp Set
KN150
Scorps Set includes:
KN12 - Cutting Knife
KN13 - Detail Knife
KN18 - Pelican Knife
KN19 - Mini Pelican Knife
Presented in a handy tool roll with a specially shaped strap. Choose a right-handed tool to cut towards you and a left-handed tool to cut away from you.
Mini-Pelican Knife
KN19
KN19 Mini Pelican Knife. The mini-pelican knives offer the same features as their larger brother (KN18) only with a 22mm ultra thin blade for the lowest resistance when fine cutting is required. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
The Flexcut Mini-Pelican Knife has a curved, ultra-thin blade that offers a clean...
Mini Chip Carving Knife
KN20
KN20 Mini Chip Knife. The mini-chip carving knife has a 16mm ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
8mm Scorp
KN23
KN23 5/16" (8mm) Right-Handed Scorp
KNL23 5/16" (8mm) Left-Handed Scorp
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Left-Handed carvers should choose a left-handed tool to cut towards yourself....
3" Draw Knife
KN25
This handy little draw knife was developed for fan carving but works great for skinning bark and roughing-off corners. It fits nicely into your tool box. A leather sheath is included to help protect your cutting edge.
Mini Detail Knife
KN27
The Mini Detail Knife has the smallest 19mm straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
Flexcut Knife Strop
PW14
Although Flexcut call this a knife strop, it can also be used for other edge tools just as effectively.If a blade has already been honed, it will benefit from stropping to polish the steel further and give an extraº of sharpness.Regular stropping of a blade means less honing which saves time and effort.Supplied with a block of Flexcut Gold Polishing Compound for a razor edge.
5" Draw Knife
KN16
This Draw Knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape.
A leather sheath is included to help protect your cutting edge.
5mm Scorp
KNL22
KN22 3/16" (5mm) Right-Handed Scorp
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities.
Only right-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself.
Flexcut Gold Polishing Compound
PW11
Designed for quickly maintaining a sharp edge, Flexcut Gold Polishing Compound has been specially formulated to apply like a crayon.
Its blend of aluminium and titanium oxide provide a balance between aggressive removal of hardened tool steel and offering a high-colour polish.
Pelican Knife
KN18
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. The curved 1.5/8" blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
Flexcut Slip Strop
PW12
The Flexcut SlipStrop is an economical way for maintaining the tools razor edge.It has been specially moulded to allow for polishing and deburring the hard to reach areas on the inside of V-tools and gouges as well as the outside edge bevel.Either side of the strop can be used.Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions
1" Mini-Draw Knife
KN17
This miniature draw knife is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The shank allows the cutting angle to be changed easily for contoured cuts.
