Parting Tools

Standard Parting Tool (830) Used to part the finished project from the waste material, the parallel sides make for a rigid tool that handles well. It reduces the amount of waste, vital if using an expensive wood. It also makes for a fine detailing tool e.g. bead and fillets. Lifetime HSS Guarantee.

Slim Fluted Parting Tool (832H) This parting tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face. The server are fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. Lifetime HSS Guarantee.

Slim Parting Tool (830SH) The slim blade allows for a very fine parted section to be achieved. This is especially useful when grain math after parting is required e.g. parting a lid for its box. The blade is 1 1/4" deep giving strength to such a thin section which eliminates flex and vibration. For a solid interface with the handle, the blade is seated and riveted a full 4" into...

Bedan Parting Tool (834) Used in the same way as the beading and parting tool, the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding. Can be used with the Sizing Tool (ref 970). Lifetime HSS Guarantee.

Micro Parting Tool (865) Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. Lifetime HSS Guarantee.

Modular Micro Parting Tool (B888/3) A smaller version of the full size diamond parting tool, the special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build-up caused by friction, thereby lessening the chance of burning the bottom of the parted-off project. Possesses a fine 2mm cutting edge. Lifetime HSS Guarantee. Compatible with the...