Sort By
Per Page
View
Grid
List
Robert Sorby Sovereign System
SOV-S
Sovereign handles, with the addition of two collets.
Handles available in three sizes.
12" - The newest of the Sovereign handles. At 12" this handle size delivers control at close range making it ideal for smaller projects.
16" - This handle is equally at home providing added comfort when stretching to the bottom of long vases or adding that stability often required with...
Robert Sorby Sovereign Handle
SOV
Sovereign Handle (SOV)
Sovereign handles, available in three sizes:
SOV-12
12" - The newest of the Sovereign handles. At 12" this handle size delivers control at close range making it ideal for smaller projects.
SOV-16
16" - This handle is equally at home providing added comfort when stretching to the bottom of long vases or adding that stability often required...
Robert Sorby Sovereign 4" Handle Extension
SOV-EXT
Sovereign 4" Handle Extension (SOV-EXT)
The Sovereign Extension is a useful addition to the range of accessories.
Custom-made during the development of the new Sovereign sets.
This 4″ extension adds length to any Sovereign handle.
Use the Sovereign Threaded Coupler (SOV-TC) to join handles together.
Robert Sorby Sovereign Threaded Coupler
SOV-TC
Sovereign Threaded Coupler (SOV-TC)
For those wanting to join two or more Sovereign handles together we offer a dedicated threaded coupler.
This item is compatible with:
Sovereign 4" Handle Extension (SOV-EXT)
Robert Sorby Sovereign Side Handle
SOV-SH
Sovereign Side Handle (SOV-SH)
The Sovereign Side Handle delivers that extra stability by providing a horizontal screw-in appendage.
The machined knurled pattern provides additional grip.
Robert Sorby Sovereign Counterweight
SOV-CW
Sovereign Counterweight (SOV-CW)
There is an internal thread in the end cap allowing for the fitting of a counterweight.
This means that the weight is always in the bottom of the handle where you want it.
Robert Sorby Sovereign Tang Collet Adaptor
SOVCOL
Collets for the Sovereign system.
SOV-C06
The SOV-C06 has the narrowest aperture and is suitable for the ¼” Spindle gouge There are also a few tools that require no collet and fit directly into 1/4” shank end of the Sovereign handle. Among these are the 1/2” and 3/4” bowl gouges, the 1/2” fingernail bowl gouge and the extra long multi tip hollowing tool.
SOV-C10
The...
Robert Sorby Unhandled Bowl Gouge
842
Bowl Gouge Unhandled (842)
A must have in the tool kit of every bowl turner.
The unhandled tool allows the turner to add their own handle.
These bowl gouges are ideal for making bowls.
They can produce either massive profiling cuts or delicate finishing cuts as necessary.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Bowl Gouge
8427
Bowl Gouge Unhandled (8427)
A must in the tool kit of every bowl turner.
These tools are ideal for making bowls.
They can produce either massive profiling cuts or delicate finishing cuts as necessary.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Fingernail Bowl Gouge
842F
Fingernail Bowl Gouge Unhandled (842F)
Now our bowl gouges are available with a fingernail grind.
The unhandled tool allows the turner to add their own handle.
Increased flexibility allows for "pull" cuts - avoiding catching the lathe bed.
Greater cutting tip area can be used, for heavy profiling cuts and fine, delicate shearing cuts.
Easily maintained and sharpened using...
Robert Sorby Unhandled Excelsior Bowl Gouge
842G
Excelsior High Performance Bowl Gouge Unhandled (842G)
A must have in the tool kit of every bowl turner. The unhandled tool allows the turner to add their own handle.
These bowl gouges are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary.
Titanium Nitride (for increased performance and resistance to edge wear. The cutting edge will...
Robert Sorby Unhandled Spindle Gouge
840
Unhandled Spindle Gouge (840)
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed.
Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle stick and other spindle products.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Fingernail Spindle Gouge
840F
Unhandled Fingernail Spindle Gouge (840F)
Ideal for fine detailing on spindle work.
Having the wing tips ground back reduces the danger of them catching when working in confined areas.
Fingernail Spindle Gouges come with a Lifetime HSS Guarantee.
Robert Sorby Unhandled Excelsior Spindle Gouge
840G
Unhandled Excelsior High Performance Spindle Gouge (840G)
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed.
Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle stick and other spindle products.
Titanium Nitride (for increased performance and resistance to edge wear. The cutting edge...
Robert Sorby Long Spindle Gouge
841
Long Spindle Gouge (841)
Apart from the length of the blade, the tools are identical to the standard length gouges.
The increased length of the blades allows a further reach into the workpiece.
Lifetime HSS Guarantee.
Robert Sorby Spindle Roughing Gouge
843
Spindle Roughing Gouge (843)
Also known simply as a roughing gouge.
Recommended for the initial turning of uneven or square spindle stock to round.
The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the work piece.
Not designed for use on bowl grain projects.
Lifetime HSS Guarantee.
Robert Sorby Excelsior Spindle Roughing Gouge
843G
Excelsior Spindle Roughing Gouge (843G)
Also known simply as a roughing gouge.
Recommended for the initial turning of uneven or square spindle stock to round.
The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the work piece.
Not designed for use on bowl grain projects.
Titanium Nitride (for increased performance...
Robert Sorby Unhandled Round Nose Scraper
820
Round Nose Scraper Unhandled (820)
Used on bowls and platters to create smooth flowing curves.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Square Scraper
823
Square Scraper Unhandled (823)
For finishing convex and flat bottomed forms.
The end profile can be modified to a specific shape as required.
Lifetime HSS Guarantee.
Robert Sorby Negative Rake Scraper 3/4"
821
Negative Rake Scraper (821)
Formerly known as the Hardwood Scraper it was originally designed to tackle hardwoods when producing musical instruments.
However, the tool is equally at home on all types of wood and is as effective on spindle work as it is on bowls – the action of the negative rake on the bevel reducing the risk of grain tear-out and leaving a polished surface that requires...
Robert Sorby Round Side Scraper
824
Round Side Scraper (824)
Designed for blending the parallel side wall and the curved bottom of vessels and boxes together.
It is excellent for undercutting the rims of small bowls.
Lifetime HSS Guarantee.
Robert Sorby Diamond Side Scraper
825
Diamond Side Scraper (825)
Used on square bottomed boxes the end profile allows the tool to create a right angled juncture between side wall and bottom.
The 85 degree angle at the end prevents the tool from cutting the side wall and the bottom at the same time.
Lifetime HSS Guarantee.
Robert Sorby Curved Scraper
B828192
Curved Scraper (828)
The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl work, e.g. round bottomed boxes.
This tool is able to take an aggressive cut, whilst retaining butterfly sensitivity for refining cuts.
Lifetime HSS Guarantee.
Robert Sorby Box Scraper
B829192
Box Scraper (829)
The special cutting profile of this scraper makes it ideal for cutting the parallel side walls of end grain boxes.
The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and flat bottomed vessels.
The profiles cause this to be very responsive and sensitive in use.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Oval Skew
809
Oval Skew Unhandled (809)
The Robert Sorby Oval Skew Chisel is a delicately balanced tool.
Originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest.
It will smooth cylinders, clean the end grain of spindles, cut hallow curves beads, pummels and v-cuts e.g. star balustrading and chair legs.
This...
Robert Sorby Unhandled Skew Chisel
810
Skew Chisel Unhandled (810)
Rectangular in section, giving this type of skew more weight.
The unhandled tool allows the turner to add their own handle.
This makes it superb for large spindle work e.g. newel posts and table legs.
This tool now has a 'rolled' edge to help turners avoid catching an edge.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Round Skew
813
Round Skew Unhandled (813)
Intended for use on Spindle work.
Lightweight, making it highly manoeuvrable.
Ideal for production work.
Can be used on fine, detailed projects up to larger functional work to produce beads, coves, highlights and other details.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Spindlemaster
812
Spindlemaster Unhandled (812)
An important addition to the spindle turners armoury.
Can be used to plane, bead, cove and trim end grain.
Easy to use and sharpen.
The polished back bevel helps to produce a high quality finish.
Exceptional results on softer, traditionally more difficult woods like pine.
Illustrated instructions supplied.
Lifetime HSS Guarantee.
Robert Sorby Standard Parting Tool
830
Standard Parting Tool (830)
Used to part the finished project from the waste material, the parallel sides make for a rigid tool that handles well.
It reduces the amount of waste, vital if using an expensive wood.
It also makes for a fine detailing tool e.g. bead and fillets.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Fluted Parting Tool
B832020
Fluted Parting Tool Unhandled (B832020)
Size: 1/16" - 2mm
This parting tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face.
The server are fibres to produce a burnished finish.
The tapered profile also reduces the risk of binding in the cut.
Lifetime HSS Guarantee.
Robert Sorby Midi Multi Tip Hollowing Tool with 3 Tips
SOV-RS100
Midi Multi Tip Hollowing Tool with 3 Tips (SOV-RS100)
The Multi Tip Hollowing Tool has a half round shank which enables a full 3/4" to be in contact with the tool rest giving the turner complete control when hollowing.
Of the two hollowing tips one is rounded for a flowing shape whilst the other is more pointed and as such is ideal for a crisp corner in a box.
They are fitted to a swivelling...
Robert Sorby Multi-Tip Hollowing Tool with 3 Tips
SOV-RS200
Multi-Tip Hollowing Tool with 3 Tips (SOV-RS200)
The Multi Tip Hollowing Tool comes complete with three cutters - two for hollowing and a third for scraping.
To be used with the Sovereign Handles SOV-16S, SOV-22S or SOV-12S.
The half round shank which enables a full 3/4' to be in contact with the tool rest giving the turner complete control when hollowing.
Of the two hollowing tips...
Robert Sorby Extra Large Multi -Tip Hollowing Tool with 3 Tips
SOV-RS300
Extra Large Multi -Tip Hollowing Tool with 3 Tips (SOV-RS300)
The Multi Tip Hollowing Tool has been in existence for a number of years.
It comes complete with three cutters - two for hollowing and a third for scraping.
One of the beauties of this tool is that it has a half round shank which enables a full 3/4' to be in contact with the tool rest giving the turner complete control when...
Robert Sorby Midi Hollowmaster +2 Tips
SOV-RS130
Midi Hollowmaster +2 Tips (SOV-RS130)
The Hollowmaster is designed to enable the hollowing of vases.
Its swan neck shape allows the cutter to access under rims.
Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.
It comes complete with two cutters - one for hollowing and a second for finishing.
Robert Sorby Hollowmaster + 2 Tips
SOV-RS230
Hollowmaster + 2 Tips (SOV-RS230)
The Hollowmaster is designed to enable the hollowing of vases.
Its swan neck shape allows the cutter to access under rims.
Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.
It comes complete with two cutters - one for hollowing and a second for finishing.
Robert Sorby TurnMaster Unhandled Chisel with Carbide Round Tip
RSTM-SCT1
TurnMaster Unhandled Chisel Carbide Round Tip (RSTM-SCT1)
This is an unhandled tool but will fit directly into your Sovereign Handle using a 1/2' collet.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide...
Robert Sorby TurnMaster Unhandled Chisel with Carbide Detail Cutter
RSTM-SCT2
TurnMaster Unhandled Chisel with Carbide Detail Cutter (RSTM-SCT2)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the...
Robert Sorby TurnMaster Unhandled Chisel with Carbide Square Tip
RSTM-SCT3
TurnMaster Unhandled Chisel with Carbide Square Tip (RSTM-SCT3)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way...
Robert Sorby TurnMaster Unhandled Chisel Includes 3 Carbide Cutters
RSTM-SCT123
TurnMaster Unhandled Chisel Includes 3 Carbide Cutters (RSTM-SCT123)
Providing choice and flexibility in one easy to handle tool.
This is an unhandled tool but will fit directly into your Sovereign Handle using a 1/2' collet.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between...
Robert Sorby Small Ultima System
SOV16S-ULTS
Small Ultima System (SOV16S-ULTS)
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.
It is equally effective on bowl grain work as well as end-grain project and available in two sizes.
The systems come fitted to the Sovereign interchangeable...
Robert Sorby Medium Ultima System
SOV22S-ULTM
Medium Ultima System (SOV22S-ULTM)
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.
It is equally effective on bowl grain work as well as end-grain project.
The Ultima is available in two sizes.
The systems come fitted to the Sovereign...
Robert Sorby Sovereign Small Ultima Unhandled
SOV-RSULTS
Small Ultima Unhandled (SOV-RSULTS)
A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle.
The Small Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods.
It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging.
It is equally...
Robert Sorby Medium Ultima Unhandled
SOV-RSULTM
Medium Ultima Unhandled (SOV-RSULTM)
A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle.
The Medium Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods.
It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging.
It is...
Robert Sorby Ultima Cutter
SOV-ULTCUT
Ultima Cutter (SOV-ULTCUT)
The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms.
It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool.
The titanium nitride version of the cutter adds wear resistance and so increases...
Robert Sorby Excelsior Ultima Cutter
SOV-ULTCUTG
Excelsior Ultima Cutter (SOV-ULTCUTG)
The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms.
It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool.
The titanium nitride version of the cutter adds wear resistance and...
Ultima Cutter Sharp.Jig
TSOV-ULTCSJ
To make sharpening quick and convenient there is also a dedicated sharpening jig.The main section is made from phosphor bronze which allows it to rotate freely within the sleeve.This means it can be used either with a diamond file, bench grinder of ProEdge.It will also man other full round cutters
Robert Sorby Ultima Finishing Cutter Head
SOV-ULTFCH
Ultima Finishing Cutter Head
An optional finishing cutter head which has a shear scraper cutter can be fitted allowing the turner to achieve a smooth surface finish.
Designed for use in the Sovereign Ultima hollowing system (SOV16S-ULTS) and (SOV22S-ULTM), which uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Robert Sorby Small Ultima Link
SOV-ULTLS
Small Ultima Link (SOV-ULTLS)
Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber.
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The...