Limited Edition Six Piece Turning Tool Set
A25HS6T
Limited Edition Six Piece Turning Tool Set - Celebrating 25 Years of Turners Retreat
Three Piece Bowl Turning Set
A84HS3T
Three Piece Bowl Turning Set (84HS)
The NEW three piece bowl turning set comprises of two new tools and the popular Fingernail Bowl Gouge.
Set Includes:
Bottom Feeder Bowl Gouge (Available in 3/8″ & 1/2″) – NEW
1″ Negative Rake Curved Profile Scraper – NEW
Fingernail Bowl Gouge (Available in 3/8″ & 1/2″)
Bottom Feeder Bowl Gouge...
Three Piece Micro Resin Pen Turning Set
RSMICRORESINSET
The Robert Sorby modular micro set is purposefully designed for pen turning with manmade acrylic and resin blanks. This set will ensure you have an improved experience and produce quality finished pens with ease.
The set consists of 2 blades: a spindle roughing gouge and a tipped HSS Cutter (827C) tool along with the longer aluminium handle from the Robert Sorby Modular Micro Tool System.
Also...
Bottom Feeder Bowl Gouge
B842
Bottom Feeder Bowl Gouge (842)
The new Bottom Feeder grind is used on the inside of bowls especially for finish cuts, you can also use it on the outside of bowls from the foot to the top for all of your finishing cuts, if you learn to use this grind for finish cuts your sanding will be greatly reduced.
Standard profile grind for ease of use and resharpening on the ProEdge or any Grinder system
Polished...
Tool Rest Adjustment Collar
LRSTRAC
The Robert Sorby TRAC is the perfect addition for every woodturner.
A common problem for every Woodturner whilst turning, is that when a new height position is required, and the locking handle is released, the tool rest drops, and the position is lost.
The new Robert Sorby TRAC allows the tool rest height to be easily adjusted up or down, by up to 1/2” / 13mm, by just turning the outer...
Precision Boring System
765
Inlaying adds character. A Precision Boring System is used in conjunction with the Indexing System for accurate hole boring in work pieces.
Pre-bored hardened steel inserts are available in:
Metric 6mm, 9mm and 12mm
Imperial inches 1/4", 3/8" and 1/2"
Corresponding HSS brad point bits ensure total accuracy when drilling.
For use in conjunction with the Indexing...
1" Negative Rake Scraper HSS
B8009
1″ Negative Rake Curved Profile Scraper (8009)
The new 1″ Negative Rake Curved Profile Scraper has been specifically designed for finishing bowls.
It has an upper facing burr for surface refinement, then hone both faces to give a clean crisp cutting edge to give an ultra fine surface finish, greatly reducing the need for sanding.
1″ wide for excellent stability and control
60-degree...
Bead Forming Tool
B835031
Bead forming tools cut perfect semi-circular beads every time.Nose design permits multiple bead designs.Lifetime HSS Guarantee
Modular Micro Spiralling Tool Handled
B370/A
Work spirals and textured patterns in soft and hard wood with this set. Easily creates barley twists, chequered patterns, hatchings, knurls and rope effect designs to name just some of the numerous shapes that this tool’s two cutter combination is capable of.
The Micro Spiralling Tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling...
Modular Micro Pen Gouge
B888/13
Pen turning has always attracted woodworkers with a taste for highly finished, eye-catching work. This tool is commonly used for preparing acrylic pen blanks.
The 8mm spindle roughing gouge has a shallower flute than a traditional roughing gouge. The shallow flute allows for more finesse and control when turning down to the required size. This reduces the chances of chipping and breakages, on these...
Modular Micro Pen Shear Scraper
B827PENSHEAR
Pen turning has always attracted woodworkers with a taste for highly finished, eye-catching work. This tool is commonly used for preparing acrylic pen blanks.
The cutter has 4 cutting edges which means you can easily rotate it up to 3 times giving you a fresh edge before having to sharpen. The cutter has radiused cutting edges for ease of use. We recommend sharpening the cutter with a diamond file...
SteadyPro Turning System
LRSSTEADYPRO
The Robert Sorby SteadyPro is a very easy to use jig that gives additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system. The easy to adjust cantilever action of the clamping rollers, ensures the optimum control for a large selection of...
Crush Grind Tool with Two Notches
B895CG2
Robert Sorby Crush Grind Tool with Two Notches
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly.
The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand...
Brass Ferrule
HF
Ferrules for all Robert Sorby tools are available as accessories. Woodturning and carving tool ferrules are brass. Smaller woodworking chisel ferrules are also brass but larger timber framing chisels and slicks are steel.
Sizes listed are for the outside diameter. O/D
8" Robert Sorby Traditional Dovetail Saw
DS820
Robert Sorby 8″ Traditional Dovetail Saw
Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.
Made from alloy spring steel
Laser marked with Kangaroo logo
Stained Sapele handle
Straight tooth line
Hand sharpened blade,...
12" Robert Sorby Traditional Tenon Saw
TS1213
Robert Sorby 12″ Traditional Tenon Saw
Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. The 13tpi allows you to have more control over the depth and direction of the cut you are making.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade,...
22” Robert Sorby Traditional Sorby Panel Saw
PS2210
Robert Sorby 22” Traditional Panel Saw
The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade, can be re-sharpened
Brass plated screws and...
ProEdge Sharpening System
WPROEDGE240UK
ProEdge - The Ultimate Sharpening System
The Robert Sorby ProEdge offers effortlessly repeatable sharpening every time. Hugely versatile, this industrial strength system is built to last and delivers astounding ‘factory finish’ results without fail. Perhaps the most simple to use sharpener on the market, this system replicates the industry standard of achieving a flat grind using the...
ProEdge Woodturning Sharpening Accessory Kit
WPEWTKIT
The Robert Sorby Woodturning Sharpening Accessory Kit has everything you need to keep your woodturning tools razor sharp to ensure you get the best results with your projects.
The kit contains the following:
Proset – helps achieve the exact bevel angle
Fingernail Profile Kit – ideal for shaping a perfect fingernail profile on bowl and spindle gouges
Skew Jig – foe accurate...
ProEdge Knife Sharpening Accessory Kit
WPEKNIFEKIT
The Robert Sorby Knife Sharpening Accessory Kit is a highly effective but simple to use system to create razor sharp edges on any style of knife blade from pocket and woodcarving knives to kitchen and hunting knives.
The fitting and setup of the Knife Sharpening system only takes a few minutes and the only piece of equipment required is a 13mm wrench/spanner.
The kit contains the following:
Raised...
ProEdge Woodworking Sharpening Accessory Kit
WPEWWKIT
The Robert Sorby Woodworking Sharpening Accessory Kit has everything you need to keep your woodworking chisels razor sharp to ensure you get the best results.
The kit contains the following:
Woodworkers’ Square Guide – Used in conjunction with the very fine abrasive sharpening belts, the Woodworkers Square Guide will give a perfect cutting edge on any woodworking chisel and plane...
Spindle Roughing Gouge 5/16"
866
A commonly used tool recommended for the initial turning of uneven or square spindle stock to round. The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the work piece. This tool is commonly used for preparing pen blanks.
Micro Spindle Gouge 1/4"
861
A spindle gouge is a detailing tool used on between centre work where the grain is running parallel to the lathe bed.Part of the micro turning tool range.Lifetime HSS Guarantee
Wall Mounted Tool Rack
LRACK
Ergonomically designed, premium quality tool storage. The Deluxe Wall Tool Rack by Robert Sorby is ideal for storing your tools proudly and safely in the workshop.
Strong steel construction with a powder coat finish. Holds tools safely with no chance of them falling out. Remove and return tools to and from the rack with a simple one hand operation.
Perfect for all workshop and education use
Stores...
Patriot Chuck
LRSPC
Like all Robert Sorby tools the Patriot is proudly manufactured in Britain. Fitted with smooth action 2" (50mm) jaws which have internal and external dovetail and gripper teeth to ensure work is held more securely. It also supplied with a screw chuck and an insert* which enable it to fit the vast majority of woodworking lathes.
Robert Sorby Woodturning Smock
9011
Robert Sorby Smock.
Sizes available:
Medium: 46" chest
Large: 48" chest
X Large: 50" chest
XX Large: 52" chest
Tear Drop Cutter
TRS213C
The Robert Sorby large tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional...
Eight Piece Turning Tool Set
A82HS8T
The most comprehensive of Robert Sorby’s full size sets. This eight piece deluxe set carries all the core tools a turner will need to accomplish many basic projects and more. It contains two sizes of spindle roughing gouge to accommodate varying sized projects and two scrapers (round and square); the round scraper is ideal for creating flowing curves and the square is perfect for finishing convex...
Six Piece Turning Tool Set
A67HS6T
This is Robert Sorby’s flagship set and our most popular tool combination. Suitable for anyone into turning, from beginners through to professionals. We strongly believe that anyone starting out turning should buy the best tools they can afford. This set comprises six of Robert Sorby’s core range. These are the standard by which the best of the rest follow and are a great introduction to...
Six Piece Sovereign Turning Tool Wooden Box Set
SOV-67DBS
This value added box set includes the same tools as the ever popular 67HS but with the benefits afforded by the Sovereign handle and extension – effectively two handle sizes in one.
Five Piece Midi Woodturning Tool Set
A52HS5T
Deluxe Five Piece Turning Tool Set.
The ideal turning tool combination for those preferring smaller tools. Five high quality HSS tools, all essential for bowl and spindle turning.
The A52HS5T, also known as the 52HS set, includes:
Spindle Roughing Gouge 3/8" (details spindle gouge)
Flat Skew Chisel 1/2" (ideal for smoothing spindle work)
Spindle Roughing Gouge 3/4" (turns...
Five Piece Beading Tool HSS Set
A55HS5T
55HS Five Piece Beading Tool Set
Bead forming tools cut perfect semi-circular beads every time.
Nose design permits multiple bead designs.
Tools included: B835031 1/8" - 3mm, B835051 3/16" - 5mm, B835061 1/4" - 6mm, B835081 5/16" - 8mm, B835101 3/8" – 10mm
Five Piece Turning Tool Leather Roll Set
A5HS5TLR
A five piece tool set with Robert Sorby branded leather tool roll, provides a turner with a ready to go first class set of tools and storage facility that will keep tools in top condition when travelling to club or chapter meetings.
Three Piece Pen Making Set
A36HS3T
This set of micro turning tools has been specifically designed for the pen turner.
18 Piece Modular Micro Set
A888HS18T
The 18 Tool Modular Micro set has all the tools the micro woodturner needs to create anything from beautiful pens to intricate dolls’ house furniture. This set also comes equipped with micro decorating and sanding tools.
Set comes complete with:
888 Aluminium Handle
888/2 Micro 1/2" (13mm) Spindle Master
888/1 Micro 1/2"(13mm) Roughing Gouge
888/3 Micro 1/16" (2mm)...
12 Piece Modular Micro Set
A888HS12T
12 Tool Modular Micro Set (888HS12T)
This set of 12 modular micro tools encompasses a range of the most popular micro woodturning blades. Great for a range of projects including spindle turning, hollowing and beading.
This 12 piece micro set includes:
888 Aluminium Handle
888/1 Micro 1/2" (13mm) Roughing Gouge
888/3 Micro 1/16" (2mm) Parting Tool
888/4 Micro 1/2" (13mm)...
Modular Micro Universal Set in Leather Tool Roll
A888HS6TR
Modular micro universal 6 piece set with leather tool roll This all-round micro woodturning set is ideal for woodturners interested in turning small and delicate pieces.
Five Piece Modular Micro Set
A888HS5T
888HS5T - Five Piece Modular Micro Set
This general purpose five bladed set is a great all rounder and a first class introductory kit for those new to turning in miniature. Essentially this is a micro version of Robert Sorby’s larger sized 52HS.
The Modular Micro Set from Robert Sorby includes:
888 Handle
888/4 Micro 1/2" (13mm) Gouge
888/5 Micro 5/32" (4mm) Beading...
Three Piece Interchangeable Pen Turning Set
A86HS3T
The modular version of the popular micro pen set.
Three Piece Modular Micro Spindle HSS Set
A88HS3T
Specially designed as an introductory set for micro spindle turning
Micro Sandmaster Set
B888SM
The micro Sandmaster, like its big brother, makes creating that ultra smooth finish a breeze.
Sovereign Spiralling & Texturing Tool Set
TSOV-3370DBS
For decorative woodturning, this set is an absolute must! Features both the full size and modular micro systems to deliver a multitude of decorative shapes and patterns.
Set includes unhandled spiralling system, texturing cutter, spiralling cutters 2mm, 4mm and 6mm pitches, unhandled modular micro spiralling tool, 2 micro spiralling cutters and micro texturing cutter, 12" Sovereign handle,...
Sovereign TurnMaster Set in Wooden Box
SOV-RSTMDBS
The Robert Sorby TurnMaster is the perfect tool for the beginner or a fantastic foil for the more experienced woodturner looking for a flexible tool to equip their workshop.
This set comes complete with 3 detachable heads to allow for quick interchanging.
Set includes:
TurnMaster shank with HSS detail point cutter fitted
HSS round cutter fitted to a detachable head
HSS square cutter...
Tool Rest Stem
L765/S13
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem.
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish.
Stems...