Chameleon Pigments Mini Bundle
TT-CF6PKBUN
The Tiny Turner Chameleon Pigments Mini Bundle
This bundle includes:
6 x Pots of pigments
1 x Acrylic Size 60ml
1 x Fluffy Brush
You will receive a full set of Tiny Turner Chameleon Pigments; a 60ml bottle of Acrylic Size and a fluffy brush which is perfect for applying the powder to the size with.
These amazing, chameleon colour-shift mica powders have been chosen to give you...
Chameleon Flakes Mini Bundle
TT-CFPHOBUN
The Tiny Turner Chameleon Flakes Mini Bundle
This bundle includes:
6 x Pots of flakes
1 x Acrylic Size 60ml
1 x Fluffy Brush
You will receive a full set of Tiny Turner Chameleon Flakes; a 60ml bottle of Acrylic Size and a fluffy brush which is perfect for applying the flakes to the size with.
These amazing, chameleon colour-shift flakes have been chosen to give you a vibrant selection...
Fluffy Brush
TT-FLBR1
The Tiny Turner Fluffy Brush
This wonderfully fluffy brush is fabulous for dry-brushing and for applying powders and flakes to size.
1 x Single brush.
Acrylic Size 60ml
TT-60AS
The Tiny Turner Acrylic Size 60ml
A 60ml bottle of water-based acrylic size perfect for use with the Tiny Turner Chameleon ranges of pigments and flakes. Also suitable for use with metal leaf and gold leaf.
Classed as a 15 minute size, this glue takes approximately 15 minutes to reach tack point after which it remains open (sticky) for around 24 hours.
Apply the pigments/flakes/leaf after...
Chameleon Pigments (Pack of 6)
TT-CF6PK
The Tiny Turner Chameleon Pigments (Pack of 6)
These amazing, chameleon colour-shift mica powders have been chosen to give you a vibrant selection of striking colours to use in your work, and are what Emma Cook 'The Tiny Turner' uses to give her textured, banded bowls their stunning finish.
Please note: each colour has a slightly different volume due to the different densities of that...
Chameleon Flakes (Pack of 6)
TT-CFPHO
The Tiny Turner Chameleon Flakes (Pack of 6)
These amazing, chameleon colour-shift flakes have been chosen to give you a vibrant selection of striking colours to use in your work.
Emma Cook 'The Tiny Turner' uses these to create her banded bowls (as well as the chameleon powders).
Please note: each colour has a slightly different volume due to the different densities of that particular...
Bollé Sphere Safety Shield
BSS5214
Bollé Sphere Safety Shield
The Bollé Sphere face shield is an excellent option for face and brow protection.
It features a clear, polycarbonate visor which is resistant to high energy impact (A marking) which gives a 180° field of vision and weighs in at a mere 355g.
The easy to rise headgear and brow guard are adjustable for both height and depth and the SPHERE adapts itself...
Wire Brush 50mm x 6mm Shank, 0.30 Wire
FAIWBS50C
Faithfull Wire Brush 50mm x 6mm Shank, 0.30 Wire
This Faithfull Wire Brush is perfect for cleaning metal surfaces prior to welding or painting. It is circular, with a 0.3mm crimped steel wire finish. It has a 6mm shank and will operate with power tools of up to 4500rpm.
Size: 50mm diameter x 6mm shaft x 0.3mm wire size. Conforms to ISO9001 & DIN EN1083-1 and 2.
Key Features
Perfect...
Battery-Powered Long Neck Angle Grinder
TR29815
Proxxon Battery-Powered Long Neck Angle Grinder LHW/A
You can use the LHW/A for work on steel, non-ferrous metal, glass, ceramics, wood and plastic. It can cut, texture, sand or grind. The variable electronic speed control still has high torque, even in the lower speed range. It takes 50mm diameter discs. The extended neck allows easy access into narrower spaces. This professional quality battery-powered...
Mini Industrial 50mm Tungsten Carbide Blade
MIN014
Arbortech Mini Industrial Blade for Mini Carver
This 50mm diameter TCT mini carving blade fits the Arbortech Mini Carver.
The blade has two solid tungsten carbide teeth making it suitable for use on tough hardwoods. The diameter allows rough shaping of smaller carvings and fine details on larger pieces. The blade gives excellent visibility and access to the workpiece.
The teeth are easy to...
Precision Carving System
PCS1000
Arbortech Precision Carving System
The Arbortech Precision Carving System is designed for free form carving, sculpting, detailing and texturing. The system consists of a Universal Base, which fits onto the Arbortech Power Carving Unit or a 100mm or 115mm angle grinder with an M14 thread. Into this base you have the choice of attaching either the Ball Gouge, Barrel Carver or Drum Sander. The system...
Arbortech Mini Pro
MIN630
Arbortech Mini Pro
Designed for use with the Arbortech Mini Carver, the Mini Pro broadens the scope of the carver and opens up new carving possibilities.
The Mini Pro is a 50mm diameter blade with 2 tungsten carbide cutting teeth. These teeth are circular and rotatable, ensuring you get the maximum possible use from their edges. When eventually worn they are easy to replace. You can use this...
Mini Carver MkII
MIN900
Arbortech Mini Carver MkII
The Mini Carver MkII is fitted with Arbotech’s latest 1,000W motor. Whether shaping, sculpting or sanding it has plenty of power and more. The Arbortech Mini Carver is a hugely versatile power carving tool. From rough shaping to sculpting, texturing, and sanding, the Mini Carver can do it all. The Mini Carver’s narrow, extended neck offers greater access into...
NOVA Nebula Bed Extension
55262
NOVA Nebula Bed Extension
The NOVA 55262 16” Bed Extension Accessory for Nebula, adds an extra 16” between centre capacity. Add as many extensions as you require for your project.
Easy to install.
Made from solid cast iron, with CAD designed webbing throughout, providing rigid strength and stability.
Comes with instructions and fasteners.
Weight: 41lbs (18.6kg)
Predator Tenon Saw 12" x 15pts
TRB9812
Spear & Jackson Predator 12" (305mm) x 15pts Tenon Saw
A fine cutting saw for use along and across the grain.
12" (305mm) harden and tempered carbon steel blade
15 PPI Hard Pointed teeth
High Impact Polystyrene handle
Soft feel non-slip grip
Fine cut - smooth, clean cutting action
Solid steel back for maximum rigidity
Ideal for tenon joints, mouldings, dowelling,...
Portable Flexible Magnetic Lamp
TRFLMBL
Eclipse Magnetics Portable Flexible Magnetic Lamp
Quick and easy set up for lighting in inaccessible areas
LED battery operated flexible lamp
Magnetic base makes it easy to attach to steel surfaces
Allows "hands free" working in poorly lit areas
Zoom in and out function with 2 brightness settings
Long reach flexible arm
12" Sabre-300 Bandsaw
69000
Record Power SABRE-300 12" Bandsaw
Revolutionise your workshop with the NEW Sabre-300. The SABRE-300 is the latest cutting-edge machine introduced into the market-leading Record Power SABRE series of bandsaws.
Designed and developed with the keen hobbyist woodworker in mind, the SABRE-300 embodies the next step in the evolution of Record Power's flagship bandsaw range, offering a high-quality...
Assorted Colours Resin Tinting Pigments (Pack of 10)
CULR10
CULR Set of 10 Colour Pigments
CULR Universal Pigments are highly concentrated liquid pigments and can be used to add anywhere between a subtle, translucent tint to solid opaque colour to epoxy resin projects such as resin art, countertops, jewellery, flooring, pen blanks and much more.
This set of 10 'foundation' colours have been carefully selected to create a colour toolkit from which...
Carpenters Marking Gauge
TRCMKG
Spear & Jackson Carpenter's Marking Gauge 8"
Rosewood Stained Hardwood with two brass plates on the working face, round brass bar through top section & brass lock screw on top.
Block size: 66 x 55 x 28 ± 1mm
Brass Plates in Block: 7 x 3mm
Brass Bar in Block: 12mm diameter
Hardwood stock and beam
Brass wear plates and locking screw
Internal brass thread
Predator Tenon Saw 10" x 15pts
TRB9810
Spear & Jackson Predator 10" (254mm) x 15pts Tenon Saw
A fine cutting saw for use along and across the grain.
10" (254mm) harden and tempered carbon steel blade
15 PPI Hard Pointed teeth
High Impact Polystyrene handle
Soft feel non-slip grip
Fine cut - smooth, clean cutting action
Solid steel back for maximum rigidity
Ideal for tenon joints, mouldings, dowelling,...
Six Piece High Impact Bevel Edge Wood Chisel Set
TRTT-BEWC6BCE
High Impact Through Tang Bevel Edge Wood Chisels
Premium Chrome Vanadium steel for superior sharpness and edge retention. Fully forged steel core to better transfer energy from handle to blade. High impact resistant strike cap to withstand hammer impacts.
Through tang for strength and durability
High impact resistant steel striking cap
Ergonomic soft feel handle
Hardened & tempered...
Robert Sorby Crush Grind Tool with Two Notches
B895CG2
Robert Sorby Crush Grind Tool with Two Notches
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly.
The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand...
Limited Edition Six Piece Turning Tool Set
A25HS6T
Limited Edition Six Piece Turning Tool Set - Celebrating 25 Years of Turners Retreat
ProEdge Woodworking Sharpening Accessory Kit
WPEWWKIT
The Robert Sorby Woodworking Sharpening Accessory Kit has everything you need to keep your woodworking chisels razor sharp to ensure you get the best results.
The kit contains the following:
Woodworkers’ Square Guide – Used in conjunction with the very fine abrasive sharpening belts, the Woodworkers Square Guide will give a perfect cutting edge on any woodworking chisel and plane...
ProEdge Woodturning Sharpening Accessory Kit
WPEWTKIT
The Robert Sorby Woodturning Sharpening Accessory Kit has everything you need to keep your woodturning tools razor sharp to ensure you get the best results with your projects.
The kit contains the following:
Proset – helps achieve the exact bevel angle
Fingernail Profile Kit – ideal for shaping a perfect fingernail profile on bowl and spindle gouges
Skew Jig – foe accurate...
ProEdge Knife Sharpening Accessory Kit
WPEKNIFEKIT
The Robert Sorby Knife Sharpening Accessory Kit is a highly effective but simple to use system to create razor sharp edges on any style of knife blade from pocket and woodcarving knives to kitchen and hunting knives.
The fitting and setup of the Knife Sharpening system only takes a few minutes and the only piece of equipment required is a 13mm wrench/spanner.
The kit contains the following:
Raised...
Pen Blank - Dark Storm
APB97
Dark Storm Acrylic Pen Blank
Dark, moody blue shimmering colours with iridescent effect
Can be easily turned
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern will vary slightly from the pictured blank due to the manufacturing process. No two are the same, making each pen you create completely unique!
Pen Blank - Blue Dash
APB96
Blue Dash Acrylic Pen Blank
Shimmering blue colours with iridescent and speckle effect
Can be easily turned
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern will vary slightly from the pictured blank due to the manufacturing process. No two are the same, making each pen you create completely unique!
Pen Blank - Green Ribbon
APB94
Green Ribbon Acrylic Pen Blank
Shimmering green tones with iridescent effect
Can be easily turned
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern will vary slightly from the pictured blank due to the manufacturing process. No two are the same, making each pen you create completely unique!
Pen Blank - Crushed Green Velvet
APB93
Crushed Green Velvet Acrylic Pen Blank
Green and black textured pen blank
Can be easily turned
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern will vary slightly from the pictured blank due to the manufacturing process. No two are the same, making each pen you create completely unique!
Chrome Pyramidal Sienna Twist Pen & Keyring Bundle
PYRABUNDLEC
Pyramidal Sienna Twist Pen Kit & Keyring Bundle
Bundle includes:
1 x Chrome Pyramidal Sienna Twist Pen Kit
1 x Chrome Keyring Kit
Please note, the image is an example of what you could create with the kits.
In addition to this bundle, you will need the following:
pen blanks
the corresponding bushing set for the pen kit
drill bit
Pyramidal Sienna Twist Pen
PYR
Project Kit
The Pyramidal Sienna Twist Pen. Available in Chrome or Gold.
Please note, the image is an example of what you could create with the kit.
In addition to this kit, you may also need:
a pen blank
bushing set
27/64" drill
Blanks used in images are Ghost of Sparta and Toxic Green.
Three Piece Bowl Turning Set
A84HS3T
Three Piece Bowl Turning Set (84HS)
The NEW three piece bowl turning set comprises of two new tools and the popular Fingernail Bowl Gouge.
Set Includes:
Bottom Feeder Bowl Gouge (Available in 3/8″ & 1/2″) – NEW
1″ Negative Rake Curved Profile Scraper – NEW
Fingernail Bowl Gouge (Available in 3/8″ & 1/2″)
Bottom Feeder Bowl Gouge...
Bottom Feeder Bowl Gouge
B842
Bottom Feeder Bowl Gouge (842)
The new Bottom Feeder grind is used on the inside of bowls especially for finish cuts, you can also use it on the outside of bowls from the foot to the top for all of your finishing cuts, if you learn to use this grind for finish cuts your sanding will be greatly reduced.
Standard profile grind for ease of use and resharpening on the ProEdge or any Grinder system
Polished...
1" Negative Rake Scraper HSS
B8009
1″ Negative Rake Curved Profile Scraper (8009)
The new 1″ Negative Rake Curved Profile Scraper has been specifically designed for finishing bowls.
It has an upper facing burr for surface refinement, then hone both faces to give a clean crisp cutting edge to give an ultra fine surface finish, greatly reducing the need for sanding.
1″ wide for excellent stability and control
60-degree...
Four Piece Carpenters Tool Set
TRCT4PS
Four Piece Carpenter's Tool Set
A carpenter's tool set featuring a sliding bevel, carpenter's try square, mortice gauge and smoothing plane.
Hardwood handles
Brass fittings
Spring steel handles
Tools included in the set
9"/230mm Sliding Bevel
9"/230mm Carpenters Set Square
8"/200mm Mortice Gauge
No.4 Smoothing Plane
Carpenters Jack Plane
TRCJP5
Spear & Jackson No. 5 Carpenters Jack Plane
No. 5 Jack Plane. Ideal for the initial preparation of rough timber.
Cast iron body
Precision milled base and faces
50mm wide high carbon steel blade
Brass adjusting screw
Carpenters Smoothing Plane
TRCSP
Spear & Jackson Carpenter's Smoothing Plane.
Ideal for cabinet work and general joinery.
Cast iron body
Precision milled base and faces
45mm or 50mm wide high carbon steel blade options available
Carpenters Block Plane 6.5"
TRCBP65
Spear & Jackon No. 6 1/2" Block Plane.
Ideal for end grain work and single-handed operation.
Cast iron body
Precision milled base and faces
35mm wide low angle cutter and fully adjustable mouth
Brass adjusting screw
Carpenters Sliding Bevel
TRCSB
Spear & Jackson Carpenters Sliding Bevel
Carpenters Sliding Bevel. Rosewood Stained Hardwood with Brass Top and Bottom end plates.
Hardwood stock
Brass top and bottom end plates
Spring steel blade
Available in 7.5", 9" or 10" inch
Carpenters Try Square
TRCTS
Spear and Jackson Carpenters Try Square
The perfect hand tool for checking and marking right angles in constructional work.
It is rosewood stained with a brass top and bottom face for increased durability.
Features:
Perfect for marking right angles
Rosewood stained hardwood with brass top and bottom faces
Spring steel blade.
Available as a 6", 9" or 12" square
Saw Tooth Setter
TR94-370R
Eclipse Saw Tooth Setter
Used for setting teeth on resharpenable woodsaws.
7.1/4"(184mm) overall length
Powder coated metal head
Nickle plated anvil
Soft feel rubber handle grips
Knurled adjustment screw for increased torque/
Painted metal head and nickel plated anvil for rust resistance
Metal handles for extra strength and durability
Soft feel, non-slip rubber handle grips...
Traditional Skew Back Saw 22" x 10pts
TR9500R
Spear & Jackson 22" (559mm) x 10pts Traditional Skew Back Saw
A general purpose saw for use along and across the grain.
22" (559mm) harden and tempered carbon steel blade
10 PPI Resharpenable teeth
Precision cross ground
Riveted wooden handle
Fast cut - rapid, clean cutting action
Skew back for balance and reduced friction
Ideal for cutting planed wood, architraves,...
Heavy Duty One Handed Bar Clamp
TREOHBC6-HD
Heavy Duty One Handed Bar Clamp
High quality aluminium heavy duty one handed bar clamps and spreaders for a variety of wood working applications.
Body is manufactured from aluminium with a carbon steel bar
Throat Depth: 85mm (3 3/8")
Sizes and Details
EOHBC6-HD: Clamping Capacity 150mm (6") Minimum Spreading Capacity 168mm (6 5/8") Maximum Spreading Capacity 355mm...
Proxxon TCT Rasp Disc
29050
Rasp plate with metal burrs made from wolfram carbide for LWS. For model-making, cleaning and smoothing of wood, plastics and glass fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processin