Odie's Super Duper Everlasting Light Oil

SDEO250 - Odie's Super Duper Everlasting Oil - Light

Item: SDEO250

Product Description

Odie's Super Duper Everlasting Oil - Light

A multi-surface treatment for wood, concrete, stone, metal and much more which is intended for interior or exterior use on projects large and small, providing an easy to use Danish Oil type product but with the strength, durability and safety you have come to expect from an Odie’s Oil product.

It provides great protection for all unfinished wood surfaces including fine furniture, tables, decks, floors and doors etc.

Supplied in an easy to use thin formulation and application couldn’t be simpler, just wipe on with a non-abrasive pad, alternatively on large areas spray, roll, or brush on and simply wipe off straight away. Multiple applications can be applied 24hrs apart to build protection and the desired finish.

Super Duper Everlasting Light Oil can be used alone or in conjunction with any other Odie’s finish product.

It works extremely well with Mr. Cornwall’s Creative Colours, just add the Mr. Cornwall’s mineral pigment directly into the bottle or a smaller quantity, then shake or stir frequently to maintain an even distribution.

Coverage is approximately 180 sq. feet per 266ml (9oz) jar.

Application tips:

Do not dilute
Calculate how much to use, no need to over apply
Work into the surface using a zero grit Scotch-Brite type pad
Wait for one to two hours
Buff off with a cotton cloth

View other products in Oils & Waxes »

Reviews
Application Process
Support Videos
Video

Customer Reviews

Application Process

Applying Odie’s Oil

Stir or mix your jar well (Oil Only) to agitate all the ingredients as they settle over time.

Tools needed: Zero grit Scotch-Brite type (non-woven) pad and clean 100% cotton cloth.

Use the fine Scotch-Brite pad to work the product into the wood in the direction of the grain. The friction from the application helps drive the product into the wood grain. Check your progress, if the surface feels dry, apply more oil, continue until the surface will not absorb any more oil. Only use what is needed, a little Odie’s goes a long way, so don’t overdo it. It can also be used as a friction polish for wood turners.

After working the product into the surfaces with the pad, allow it to set for 45 minutes to 2 hours but not longer than 20 hours. You can wait a bit longer but you will find it harder to buff off and residual oil.

After waiting for the product to set, use a clean 100% cotton cloth and buff off all the product from your project surfaces. When your towel is loading up with product switch to a new cloth until the entire surface is buffed off and no product remains. If you can swipe a clean finger across the surface and not leave a mark you are done.

Your piece can be handled almost immediately after buffing; however, we suggest you give it a day or two to cure before use. If you know the piece is going to be exposed to water or liquids, we suggest you give it two weeks to cure for best results.

Additional coats of Odie’s products can be applied using these same easy steps above, we suggest waiting 24 hours between coats.