Robert Sorby Jaw & Collet Tool
817
Jaw & Collet Tool (817)
Designed to cut the perfect dovetail required on a tenon or in a recess when mounting a timber blank on the jaw or collets of a woodturning chuck.
The unhandled version of the tool allows the turner to add their own handle.
General Care
We recommend applying a light oil to the blades when not in use to keep them in perfect condition.
Robert Sorby Relief Cutting Tool
B895001
Relief Cutting Tool (895H)
The Robert Sorby Relief Cutting Tool is designed to help the turner avoid stripping out the bottom of boxes when thread cutting.
For best results use in combination with the Tool Support Rest.
General Care
We recommend applying a light oil to the blades when not in use to keep them in perfect condition.
Robert Sorby Crush Grind Tool with Two Notches
B895CG2
Robert Sorby Crush Grind Tool with Two Notches (B895CG2)
For anyone turning salt and pepper mills using a Crush Grind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly.
The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on...
Robert Sorby Ring Tool
B845133
Ring Tool (845)
Designed specifically for end grain hollowing. The dual bevels allow for hollowing of internal curved surfaces and flat bottomed vessels.
This tool produces an unrivalled surface finish on end grain.
The unhandled version of this tool allows the turner to add their own handle.
Ideal for goblets and egg cups.
Comes complete with full instructions.
Robert Sorby Thread Cutting Set
89HS
The perfect tool for making screw tight lids on boxes and caskets.
Robert Sorby Thread Cutters
890
Thread Cutters (890)
These Robert Sorby Thread Cutters are perfect for making lidded boxes, helping produce threaded lids, specially produced for cutting in wood.
Available Handled and Unhandled.
Producing threads needs a lot of practice and a steady hand but once mastered this technique adds significant value to your project.
Thread cutters are available in matching pairs for internal...
Robert Sorby Texturing Tool
310
Texturing Tool (B310)
This tool will enhance the visual and tactile qualities of any turned project.
By rubbing the cutter across the turned project an interesting textured effect can be created.
The texture pattern can altered by changing the angle of the cutter, the speed of the lathe, the position of the tool rest and the type of wood.
The range of textures can vary from an orange peel...
Robert Sorby Spiralling Tool
320-330
Spiralling Tool (320-330)
Creating barley twists, spirals and flutes has always represented a problem for the woodturner.
The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner's imagination to run wild as he enters a new field of decoration.
Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice...
Robert Sorby Toolrest
B360
Toolrest (B360)
The tool rest enables those who already possess a Texturing Tool (B310) to convert it to a Spiralling System.
Robert Sorby Texturing Cutter
B350/00
Texturing Cutter (B350/00)
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects.
One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide.
With a bit of practice you'll...
Robert Sorby Spiralling Cutter
B350
Spiralling Cutter (B350)
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects.
One of a family of five cutters for the large texturing and spiralling tools.
Experiment using the various pitch depths these cutters provide. With a bit of practice you'll...
Robert Sorby Unhandled Modular Micro Spiralling Tool
B370/0
Modular Micro Spiralling Tool Unhandled (B370/0)
The unhandled micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling System (B320, B320S).
This tool is also available with a handle (B370/A).
A further texturing cutter is available as an optional extra.
Robert Sorby Micro Texturing Cutter
B370
Micro Texturing Cutter (B370)
The Robert Sorby Fine Micro Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of small spiral patterns and textures on a range of projects including bowls, vases and boxes.
One of three cutters for the Modular Micro Spiralling Tool.
Experiment using the various pitch depths these cutters provide.
With a bit of practice...
Robert Sorby Sovereign Spiralling & Texturing Tool Set
TSOV-3370DBS
Sovereign Spiralling & Texturing Tool Set (SOV-3370DBS)
For decorative woodturning, this set is an absolute must! Features both the full size and modular micro systems to deliver a multitude of decorative shapes and patterns.
Set includes unhandled spiralling system, texturing cutter, spiralling cutters 2mm, 4mm and 6mm pitches, unhandled modular micro spiralling tool, 2 micro spiralling...
Thread Cutting & Eccentric Chuck DVD
RSDVDTCEC
50 mins.A unique instructional DVD showing you how to form internal & external threads.This is a must for anyone making an initial attempt to cut threads on turned projects.Several projects are shown in depth.
Robert Sorby Chattertool Kit
RS215KT
Chattertool Kit (RS215KT)
The Chattertool creates random decorative patterns on end grain only, making it ideal for box lids and jewellery.
Each pattern created is unique as it is determined by the shape of the cutter, the speed of the lathe, the length of protrusion of the blade, and the type of wood.
The random nature of these decorations means they are unrepeatable unless exactly the same...
Robert Sorby Tool Support
B893003
Tool Support (893H)
Extra control is given by the tool support when threading internally.
Designed as a tool support for the Robert Sorby Relief Cutting Tool and for use with the internal thread cutters to make forming internal threads easier.