Sort By
Per Page
View
Grid
List
Digital Calliper
DC
Eliminate the guesswork involved with using traditional callipers with these 8" digital callipers.
These fractional display callipers can be preset to a specific measurement or simply used to display the size of work being measured.
Thecallipers are made of aluminium and spring loaded for easy operation and feature a large handle for convenient use. The easy to read display shows measurements...
Robert Sorby Sizing Tool
970
Sizing Tool (H970000)
In order to obtain accurate and consistent diameters up to 3" the Sizing Tool is a useful accessory.
It takes the parting tool, 3/16" diamond parting tool and the beading and parting tool.
Perfect for measuring the inside or the outside of your pieces on the board.
Adjusting the distance between the tip and cutting edge determines the diameter of filming.
It...
Robert Sorby Vessel Caliper
H9710000
Vessel Caliper (9710)
These vessel callipers are designed for internal and thin-wall dimensioning.
The straight arm is especially useful for accessing narrow vessels.
Sizes can be read at either end.
Available in 2.1/2", 5" and 10" models.
Robert Sorby Double Ended Calipers
H97
Double Ended Calipers (974)
These are an indispensable addition to the turner's armoury for measuring both wall thickness and diameters.
Because of their design the measurement taken at one end automatically transfers to the opposite end.
This enables the turners to take an accurate measurement reading without the need to remove the callipers.
Available in 4" and 7" models.
The...
Robert Sorby Internal/External Caliper 8.1/2"
H978500
Internal/External Caliper 8.1/2" (H978500)
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture.
As with double ended callipers the measurement at one end automatically transfers to the opposite.
Available in 6" and 8 1/2" models.
Robert Sorby Inside/Outside Calipers 6"
H976000
Inside/Outside Calipers 6" (H976000)
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture.
As with double ended callipers the measurement at one end automatically transfers to the opposite.
Available in 6" and 8 1/2" models.
Robert Sorby Depth Stop for Boring Tool
B853
Depth Stop for Boring Tool (B853)
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber.
The boring bar and depth stop (852H and 853) form an ideal method of quickly opening up a vessel to provide both entry opening and final hollowing depth.
Photo shows 853 fitted onto a tool.
Robert Sorby Thread & Sizing Gauge
H973000
Thread & Sizing Gauge (H973000)
Ideal for box-makers, this gauge takes all the guess-work out of fitting the major and minor diameters of pieces.
With the gauge set at the unmarked anvil this creates a 1:1 correlation between the measuring faces and facilitates accurate push fits.
The other three anvils are marked 10, 16 and 20 which relates to the tip most commonly used by thread cutters.
The...