Sort By
Per Page
View
Grid
List
Robert Sorby Slim Parting Tool
B830S08
Slim Parting Tool (830SH)
The slim blade allows for a very fine parted section to be achieved.
This is especially useful when grain math after parting is required e.g. parting a lid for its box.
The blade is 1 1/4" deep giving strength to such a thin section which eliminates flex and vibration.
For a solid interface with the handle, the blade is seated and riveted a full 4" into...
Robert Sorby TurnMaster Carbide Detail Point Cutter
RSTM-CT2
TurnMaster Carbide Detail Point Cutter (RSTM-CT2)
Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material.
Although designed as a throwaway item it can be sharpened on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt.
Sharpens to 0.7 microns.
Hardness is 90RC.
Material is micro grade tungsten carbide.
Better...
Robert Sorby TurnMaster Carbide Square Cutter
RSTM-CT3
TurnMaster Carbide Square Cutter (RSTM-CT3)
Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material.
Although designed as a throwaway item it can be sharpened on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt.
Sharpens to 0.7 microns.
Hardness is 90RC.
Material is micro grade tungsten carbide.
...
Robert Sorby TurnMaster Tungsten Carbide Round Cutter
RSTM-CT1
TurnMaster Carbide Round Cutter (RSTM-CT1)
Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material.
Although designed as a throwaway item it can be sharpened on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt.
Sharpens to 0.7 microns.
Hardness is 90RC.
Material is micro grade tungsten carbide.
Better...
Robert Sorby Double Ended Calipers
H97
Double Ended Calipers (974)
These are an indispensable addition to the turner's armoury for measuring both wall thickness and diameters.
Because of their design the measurement taken at one end automatically transfers to the opposite end.
This enables the turners to take an accurate measurement reading without the need to remove the callipers.
Available in 4" and 7" models.
The...
Robert Sorby No.3 Turning Tool Handle (700/3)
HTT3
12' Ash Handle for woodturning tools, complete with ferrule and end cap.
Robert Sorby Hollowmaster + 2 Tips
SOV-RS230
Hollowmaster + 2 Tips (SOV-RS230)
The Hollowmaster is designed to enable the hollowing of vases.
Its swan neck shape allows the cutter to access under rims.
Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.
It comes complete with two cutters - one for hollowing and a second for finishing.
Robert Sorby No.1 Turning Tool Handle (700/1)
HTT1
No.1 Turning Tool Handle (700/1)
8.3/4" Ash Handle for woodturning tools, complete with ferrule and end cap.
Little Hogger
ST-LH
The “Little Hogger™” uses the latest technology to set the 30 deg angle of the 6mm shear cup cutter. This angle allows for repetitive cuts. This angle produces the smoothest of pull cuts. The “Little Hogger™” is designed to fit most hollowing systems in the market today, including the Robert Sorby Multi Tip Hollowing Tools RS200KT and RS230KT.
The kit includes:
3/16...
6mm Shear Cup Carbide Cutter
RDS61
6mm diameter Shear Cup Cutter suitable for the Pro-Hogger and Little Hogger 2.35mm thick 7' cutter angle Also suitable for: Osprey #1 Hercules Hunter Tools Jackosky Hollow pro Rocket JT Tools Hunter Retrofit Jimmy Clewes Mate 1
3pc Carbide Mini Turning Tool Cutter Set
CTT6
Pack of three spare carbide mini turning tool cutters for the 3pc Carbide Mini Turning Tool Set.
1" Mini-Draw Knife
KN17
This miniature draw knife is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The shank allows the cutting angle to be changed easily for contoured cuts.
Foredom High Speed Micromotor Kit 1/8" Collet
K107018-21
For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewellery making and fine detailing in wood. Kit includes control box, handpiece with 1/8" collet, variable speed foot control, handpiece cradle, spare pair of motor brushes, spare fuse and collet changing wrenches.
Compared to flexible shaft machines, micromotors have less torque, however,...
Portable Rotary Micromotor Kit
K103018-21
Micromotor with pocket size control has Li-ion rechargeable battery for the ultimate in portability. Variable speed up to 30,000 RPM. Handpiece comes with 1/8" collet.
Run time is approximately 6-7 hours, depending on how long the micromotor is in continuous use when in battery mode, or plug it in for day-long use. Battery charge time is 4 hours and it is best to charge it while the handpiece...
Left-Handed Hook Knife
MOR164-L
Left Handed Mora Woodcarving Hook
This knife has a single-edged stainless steel blade for right hand use. The back of the knife is not sharp which gives you the possibility to use your left hand to push the blade with your fingers from the back. This blade has a narrow curve.
The Mora crook knife 164 is a specialist hook knife for spoon and bowl carving.
It has an oiled birch wood handle...
Robert Sorby Unhandled Continental Spindle Gouge
839
Continental Spindle Gouge Unhandled (839)
Originating from Europe, these tools have gained a reputation for their superb handling qualities on spindle work.
The unhandled tool allows the turner to add their own handle.
Being a forged construction, they have an even wall thickness, thereby increasing finesse without compromising strength.
Lifetime HSS Guarantee.
Robert Sorby Continental Spindle Gouge
B839082
Continental Spindle Gouge (839H)
Originating from Europe, these tools have gained a reputation for their superb handling qualities on spindle work.
Being a forged construction, they have an even wall thickness, thereby increasing finesse without compromising strength.
Lifetime HSS Guarantee.
Robert Sorby Sandmaster Velcro Sponge Pad
W41
Velcro Sponge Pad (411/412/413)
Velcro spongepad for the Robert Sorby Sandmaster.
The velcro head allows the user to interchange sanding discs when using the bowl sander.
Easy and quick to fit into the Robert Sorby Sandmaster Bowl Sander (W410).
Square Carbide Cutter
SQ102
Cutter Size: 10.5mm square 2mm thick Cutting angle: 35 degree Mounting Countersunk hole: 4mm diameter Suitable for: Rockler Mini Square Tool (cutter S1) Penn State industries Carbide Magic Pen Genie Easy Wood Tools (cutter Ci2)
Square Carbide Cutter
SQ11RA2
Cutter Size: 11mm square with 50mm radius sides and corners 2mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.3mm diameter Suitable for: Easy Wood Tools - Easy Start Rougher, Easy Roughers, Mini & Mid Size Tools (cutter Ci1) Woodpecker Ultra Shear Pen Size Square Tool
Square Carbide Cutter
SQ10RC
Cutter Size: 10.5mm square with rounded corners 2mm thick Cutting angle: 35 degree Mounting Countersunk hole: 4.35mm diameter Suitable for: The AXE Turning Tool by Carter Products Easy Wood Tools (cutter Ci2)
Square Carbide Cutter
SQ15RA2
Cutter Size: 15mm square with 50mm radius sides 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: The AXE Turning Tool by Carter Products Easy Wood Tools (cutter (Ci1)
Robert Sorby Spindle Gouge
840H
Spindle Gouge (840H)
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed.
Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects.
Lifetime HSS Guarantee.
10" Traditional Professional Tenon Saw
TR5410Y
Spear & Jackson Traditional Professional Woodworking Tenon Saw 10" x 13pts
The Spear & Jackson Traditional Professional Tenon Saw is used for joint cutting & sawing small pieces of wood
Universal teeth for general use, cuts along and across the grain
Precision cross ground teeth for extra sharpness
Solid brass back for maximum rigidity
Comfortable wooden handle secured...
Carpenters Try Square
TRCTS
Spear and Jackson Carpenters Try Square
The perfect hand tool for checking and marking right angles in constructional work.
It is rosewood stained with a brass top and bottom face for increased durability.
Features:
Perfect for marking right angles
Rosewood stained hardwood with brass top and bottom faces
Spring steel blade.
Available as a 6", 9" or 12" square
Traditional Skew Back Saw 22" x 10pts
TR9500R
Spear & Jackson 22" (559mm) x 10pts Traditional Skew Back Saw
A general purpose saw for use along and across the grain.
22" (559mm) harden and tempered carbon steel blade
10 PPI Resharpenable teeth
Precision cross ground
Riveted wooden handle
Fast cut - rapid, clean cutting action
Skew back for balance and reduced friction
Ideal for cutting planed wood, architraves,...
12" Traditional Brass Back Tenon Saw
TR9550B
Spear & Jackson Traditional Brass Back Woodworking Saw 12" x 15pts
This Traditional Brass Back Saw is primarily for joint cutting and sawing small pieces of wood and wood based materials.
Universal teeth for general use, cuts along and across the grain
Brass back for maximum rigidity
Comfortable, strong wooden handle securely fixed by rivets
High carbon steel blade
...
Carpenters Sliding Bevel
TRCSB
Spear & Jackson Carpenters Sliding Bevel
Carpenters Sliding Bevel. Rosewood Stained Hardwood with Brass Top and Bottom end plates.
Hardwood stock
Brass top and bottom end plates
Spring steel blade
Available in 7.5", 9" or 10" inch
Robert Sorby 12" Traditional Tenon Saw
TS1213
Robert Sorby 12″ Traditional Tenon Saw
Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. The 13tpi allows you to have more control over the depth and direction of the cut you are making.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade,...
Carpenters Marking Gauge
TRCMKG
Spear & Jackson Carpenter's Marking Gauge 8"
Rosewood Stained Hardwood with two brass plates on the working face, round brass bar through top section & brass lock screw on top.
Block size: 66 x 55 x 28 ± 1mm
Brass Plates in Block: 7 x 3mm
Brass Bar in Block: 12mm diameter
Hardwood stock and beam
Brass wear plates and locking screw
Internal brass thread
Carpenters Smoothing Plane
TRCSP
Spear & Jackson Carpenter's Smoothing Plane.
Ideal for cabinet work and general joinery.
Cast iron body
Precision milled base and faces
45mm or 50mm wide high carbon steel blade options available
Robert Sorby 22” Traditional Sorby Panel Saw
PS2210
Robert Sorby 22” Traditional Panel Saw
The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade, can be re-sharpened
Brass plated screws and...
Robert Sorby 8" Traditional Dovetail Saw
DS820
Robert Sorby 8″ Traditional Dovetail Saw
Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.
Made from alloy spring steel
Laser marked with Kangaroo logo
Stained Sapele handle
Straight tooth line
Hand sharpened blade,...
Carpenters Jack Plane
TRCJP5
Spear & Jackson No. 5 Carpenters Jack Plane
No. 5 Jack Plane. Ideal for the initial preparation of rough timber.
Cast iron body
Precision milled base and faces
50mm wide high carbon steel blade
Brass adjusting screw
Square Carbide Cutter
SQ15RA4
Cutter Size: 15mm square with 100mm radius sides and corners 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Woodpecker Ultra Shear FSS and MSS (cutter 20123) Easy Wood Tools - Easy Roughers, Full & Pro (cutter Ci1)
Four Piece Carpenters Tool Set
TRCT4PS
Four Piece Carpenter's Tool Set
A carpenter's tool set featuring a sliding bevel, carpenter's try square, mortice gauge and smoothing plane.
Hardwood handles
Brass fittings
Spring steel handles
Tools included in the set
9"/230mm Sliding Bevel
9"/230mm Carpenters Set Square
8"/200mm Mortice Gauge
No.4 Smoothing Plane
Square Carbide Cutter
SQ15RA6
Cutter Size: 15mm square with 150mm radius sides and corners 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Savannah 7538 Woodpecker Full Size Square Easy Wood Tools (cutter (Ci1)
Square Carbide Cutter
SQ15
Cutter Size: 15mm square 2.5mm thick Cutting angle: 35 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Easy Wood Tools - Easy Roughers, Full & Pro (cutter (Ci1) Woodpecker Ultra-Shear FSS & MSS (cutter 20121) Simple Woodturning Tools - Simple Rougher SR
Square Carbide Cutter
SQ15R
Cutter Size: 15mm square with 1.6mm rounded corners 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Easy Wood Tools - Easy Roughers, Full & Pro (cutter (Ci1)
Round Carbide Cutter
RD9
Cutter Size: 9mm diameter 1.85mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.80mm diameter Suitable for: Savannah 7540 EWT Mid size Easy Hollower #1 (cutter CI5) EWT Mid size Easy Hollower #2 (cutter Ci5) EWT Mid size Easy Hollower #3 (cutter Ci5)
Round Carbide Cutter
RD15
Cutter Size: 15mm diameter 3.2mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.9mm diameter Suitable for: Robert Sorby Turnmaster Rockler Full Size Tool (cutter R2) Harrison Specialities Simple Turner & Hollower STH Tool Harrison Specialities Simple Swan Neck Hollower...
Round Carbide Cutter
RD16
Cutter Size: 16mm diameter 3mm thick Cutting angle: 30 degree Mounting Countersunk hole: 5.5mm diameter Suitable for: The AXE Carbide Tip Turning Tool by Carter Products Carbide Wood Turning Tools Easy Wood Tools (cutter Ci0)
Diamond Carbide Cutter
DIA10R
Cutter Size: 10mm x 28mm diamond shape 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.15mm diameter Suitable for: Rockler Mini Carbide Turning Tool (cutter D1) Penn State industries Carbide Magic Detailer Easy Wood Tools - Easy Detailers (except micro & mid-size micro) (cutter (Ci4)
Diamond Carbide Cutter
DIA10S
Cutter Size: 10mm x 28mm diamond shape 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.15mm diameter Suitable for: Rockler Mini Carbide Turning Tool (cutter D1) Penn State industries Carbide Magic Detailer Easy Wood Tools - Easy Detailers (except micro & mid-size micro) (cutter (Ci4)...
Diamond Carbide Cutter
DIA14
Cutter Size: 14mm x 28mm diamond shape 2mm thick Cutting angle: 30 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Robert Sorby Turnmaster
Diamond Carbide Cutter
DIA37
Cutter Size: 8.63mm x 37.7mm diamond shape 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Easy Wood Tools - Micro Detailer & Mid-size Micro Detailer (cutter (Ci7)
Carbide Teardrop Cutter
CTD-L
4.5mm x 19mm tead drop shape 3.2mm thick The cutter should be mounted on a bar that is 16mm to 19mm wide
Robert Sorby SteadyPro Turning System
LRSSTEADYPRO
SteadyPro Turning System (LRSSTEADYPRO)
The Robert Sorby SteadyPro is a very easy to use jig that gives additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system. The easy to adjust cantilever action of the clamping rollers, ensures the...