Sort By
Per Page
View
Grid
List
Robert Sorby Medium Ultima Link
SOV-ULTLM
Medium Ultima Link (SOV-ULTLM)
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The multi- variable configuration head and link system allows the tool to be used in a variety of positions...
Robert Sorby Medium Ultima Unhandled
SOV-RSULTM
Medium Ultima Unhandled (SOV-RSULTM)
A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle.
The Medium Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods.
It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging.
It is...
Robert Sorby Midi Hollowmaster
RS130KT
Midi Hollowmaster (RS130KT)
Designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example.
This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work.
Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping...
Robert Sorby Midi Hollowmaster +2 Tips
SOV-RS130
Midi Hollowmaster +2 Tips (SOV-RS130)
The Hollowmaster is designed to enable the hollowing of vases.
Its swan neck shape allows the cutter to access under rims.
Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.
It comes complete with two cutters - one for hollowing and a second for finishing.
Robert Sorby Midi Multi Tip Hollowing Tool
RS100KT
Midi Multi Tip Hollowing Tool (RS100KT)
All the benefits and attributes of the full size Multi-tipped Hollowing tool (RS200KT) but 2/3 the size, giving access through a much smaller aperture when turning fine hollow forms.
Comes with three cutters (RS222, RS111C & RS112C).
Robert Sorby Midi Multi Tip Hollowing Tool with 3 Tips
SOV-RS100
Midi Multi Tip Hollowing Tool with 3 Tips (SOV-RS100)
The Multi Tip Hollowing Tool has a half round shank which enables a full 3/4" to be in contact with the tool rest giving the turner complete control when hollowing.
Of the two hollowing tips one is rounded for a flowing shape whilst the other is more pointed and as such is ideal for a crisp corner in a box.
They are fitted to a swivelling...
Robert Sorby Midi Point Tip
RS112C
Midi Point Tip (RS112C)
The Robert Sorby Midi Point Tip cutter provides an excellent choice for creating parallel sides on small boxes and vases.
This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. Designed for the Midi Multi-tip Hollowing Tool this cutter is great for the smaller project.
Sharpening:
Use a diamond file or honing stone...
Robert Sorby Midi Round Tip
RS111C
Midi Round Tip (RS111C)
The Robert Sorby Midi Round Tip cutter provides an excellent choice for removing waste material quickly and efficiently, especially when undercutting on smaller projects.
Sharpening:
Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Perfect...
Robert Sorby Multi-Tip Hollowing Tool
RS200KT
Multi-Tip Hollowing Tool (RS200KT)
A most versatile hollowing tool.
Ideal for end and side grain. Will under-cut rims.
Includes a scraper blade for half round, shallow and flat work as well as shear scraping.
New beading and coving cutters can also be fitted.
Includes use and sharpening instructions.
Robert Sorby Multi-Tip Hollowing Tool with 3 Tips
SOV-RS200
Multi-Tip Hollowing Tool with 3 Tips (SOV-RS200)
The Multi Tip Hollowing Tool comes complete with three cutters - two for hollowing and a third for scraping.
To be used with the Sovereign Handles SOV-16S, SOV-22S or SOV-12S.
The half round shank which enables a full 3/4" to be in contact with the tool rest giving the turner complete control when hollowing.
Of the two hollowing tips...
Robert Sorby No.1 Turning Tool Handle (700/1)
HTT1
No.1 Turning Tool Handle (700/1)
8.3/4" Ash Handle for woodturning tools, complete with ferrule and end cap.
Robert Sorby No.3 Turning Tool Handle (700/3)
HTT3
12' Ash Handle for woodturning tools, complete with ferrule and end cap.
Robert Sorby Unhandled Fluted Parting Tool
B832020
Fluted Parting Tool Unhandled (B832020)
Size: 1/16" - 2mm
This parting tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face.
The server are fibres to produce a burnished finish.
The tapered profile also reduces the risk of binding in the cut.
Lifetime HSS Guarantee.
Robert Sorby Unhandled Continental Spindle Gouge
839
Continental Spindle Gouge Unhandled (839)
Originating from Europe, these tools have gained a reputation for their superb handling qualities on spindle work.
The unhandled tool allows the turner to add their own handle.
Being a forged construction, they have an even wall thickness, thereby increasing finesse without compromising strength.
Lifetime HSS Guarantee.
Robert Sorby Bead Forming Tool
B835031
Bead Forming Tool (835H)
Bead forming tool cuts perfect semi-circular beads every time.
Nose design permits multiple bead designs.
Lifetime HSS Guarantee.
General Care
We recommend applying a light oil to the blades when not in use to keep them in perfect condition.
Robert Sorby HSS TurnMaster Pack of Three Cutters
RSTM-TIP123
HSS TurnMaster Pack of Three Cutters (RSTM-TIP123)
High speed steel pack of three cutters, round cutter, square cutter and detail point cutter.
This super fine grain structure will provide a razor sharp edge.
The result is a superior finish to your turning projects and less need for sanding.
Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench...
Robert Sorby TurnMaster HSS Pack of Four Cutters
RSTM-TIP4567
TurnMaster HSS Pack of Four Cutters (RSTM-TIP4567)
The pack contains:
French Curve, perfect for shear scraping inside forms such as egg cups and goblets.
Teardrop, a popular cutter choice ideal for a range of finishing sweeping cuts inside or outside forms.
Mushroom cutter, great for undercutting.
Dovetail or box scraper, an model choice for creating parallel side walls and 90 degrees...
6mm Shear Cup Carbide Cutter
RDS61
6mm diameter Shear Cup Cutter suitable for the Pro-Hogger and Little Hogger 2.35mm thick 7' cutter angle Also suitable for: Osprey #1 Hercules Hunter Tools Jackosky Hollow pro Rocket JT Tools Hunter Retrofit Jimmy Clewes Mate 1
Robert Sorby Recess Cutter
RS234C
Recess Cutter (RS234C)
The Robert Sorby Recess and Dovetail cutter is an excellent addition to the Robert Sorby Multi-tip Hollowing Tool and is the perfect tool for job when creating recesses and dovetails at 40 and 60 degrees.
Ideal as the foot on a bowl for gripping in the chuck jaws.
Sharpening:
Use a diamond file or honing stone flat across the top face. To gain best results and...
Robert Sorby Reversible Hooker for Deep Hollowing Tools
RS210
Reversible Hooker (RS210)
The Hooker is designed as a safe method of hollowing vessels through narrow openings.
It comes fitted with a scraper cutter (RS222) for finishing but also takes the swivel assembly and hollowing tips (RS211C and RS212C).
Its design allows for both inboard and outboard turning.
It should be fitted to the Main Handle (RS202) and Side Handle (RS203) or alternatively...
Round Carbide Cutter
RD9
Cutter Size: 9mm diameter 1.85mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.80mm diameter Suitable for: Savannah 7540 EWT Mid size Easy Hollower #1 (cutter CI5) EWT Mid size Easy Hollower #2 (cutter Ci5) EWT Mid size Easy Hollower #3 (cutter Ci5)
Round Carbide Cutter
RD15
Cutter Size: 15mm diameter 3.2mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.9mm diameter Suitable for: Robert Sorby Turnmaster Rockler Full Size Tool (cutter R2) Harrison Specialities Simple Turner & Hollower STH Tool Harrison Specialities Simple Swan Neck Hollower...
Round Carbide Cutter
RD16
Cutter Size: 16mm diameter 3mm thick Cutting angle: 30 degree Mounting Countersunk hole: 5.5mm diameter Suitable for: The AXE Carbide Tip Turning Tool by Carter Products Carbide Wood Turning Tools Easy Wood Tools (cutter Ci0)
Robert Sorby Midi Round Cutter
RS130C
Midi Round Cutter (RS130C)
The Robert Sorby Midi Round Cutter is the perfect circular cutter for all general purpose turning.
An incredible all rounder this cutter provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening.
The perfect accompaniment for the Midi Hollowmaster the tool it was designed for and for delivering those scraping...
Robert Sorby Round End Swivel Tip
RS211C
Round End Swivel Tip (RS211C)
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting.
A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below).
This cutter is also available in Robert Sorby's Excelsior (titanium nitride coated high speed steel) series.
Sharpening:
Use...
Robert Sorby Round Scraper Tip
RS230C
Round Scraper Tip (RS230C)
The Robert Sorby Full Round Cutter is the perfect circular cutter for all general and large purpose hollow form turning.
An incredible all-rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening.
The perfect accompaniment for the Hollowmaster the tool it was...
Robert Sorby Side/End Cut Swivel Tip
RS212C
Side/End Cut Swivel Tip (RS212C)
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases.
This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners.
This cutter is also available in Robert Sorby's Excelsior (titanium nitride coated high speed steel) series.
Sharpening:
Use a diamond file or honing...
Robert Sorby Ultima Finishing Cutter Head
SOV-ULTFCH
Ultima Finishing Cutter Head
An optional finishing cutter head which has a shear scraper cutter can be fitted allowing the turner to achieve a smooth surface finish.
Uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Designed for use in the Sovereign Ultima hollowing system (SOV16S-ULTS) and (SOV22S-ULTM).
Robert Sorby Sovereign Ultima Head - No Cutter
SOV-ULTMHEAD
Ultima Head without cutter (SOV-ULTMHEAD)
The Sovereign Ultima hollowing system uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The multi- variable configuration head and link system allows the tool to be used in a variety of...
Robert Sorby Small Ultima Link
SOV-ULTLS
Small Ultima Link (SOV-ULTLS)
Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber.
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The...
Robert Sorby Small Ultima System
SOV16S-ULTS
Small Ultima System (SOV16S-ULTS)
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.
It is equally effective on bowl grain work as well as end-grain project and available in two sizes.
The systems come fitted to the Sovereign interchangeable...
Robert Sorby Sovereign Small Ultima Unhandled
SOV-RSULTS
Small Ultima Unhandled (SOV-RSULTS)
A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle.
The Small Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods.
It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging.
It is equally...
Robert Sorby Medium Ultima System
SOV22S-ULTM
Medium Ultima System (SOV22S-ULTM)
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.
It is equally effective on bowl grain work as well as end-grain project.
The Ultima is available in two sizes.
The systems come fitted to the Sovereign...
Robert Sorby Sovereign Handle
SOV
Sovereign Handle (SOV)
Sovereign handles, available in three sizes:
SOV-12
12" - The newest of the Sovereign handles. At 12" this handle size delivers control at close range making it ideal for smaller projects.
SOV-16
16" - This handle is equally at home providing added comfort when stretching to the bottom of long vases or adding that stability often required...
Robert Sorby Sovereign System
SOV-S
Sovereign handles, with the addition of two collets.
Handles available in three sizes.
12" - The newest of the Sovereign handles. At 12" this handle size delivers control at close range making it ideal for smaller projects.
16" - This handle is equally at home providing added comfort when stretching to the bottom of long vases or adding that stability often required with...
Robert Sorby Sovereign 4" Handle Extension
SOV-EXT
Sovereign 4" Handle Extension (SOV-EXT)
The Sovereign Extension is a useful addition to the range of accessories.
Custom-made during the development of the new Sovereign sets.
This 4″ extension adds length to any Sovereign handle.
Use the Sovereign Threaded Coupler (SOV-TC) to join handles together.
Robert Sorby Sovereign Counterweight
SOV-CW
Sovereign Counterweight (SOV-CW)
There is an internal thread in the end cap allowing for the fitting of a counterweight.
This means that the weight is always in the bottom of the handle where you want it.
Robert Sorby Sovereign Hollowing Starter Set
SOV-RS200DBS
Sovereign Hollowing Starter Set (SOV-RS200DBS)
This set focuses on one of Robert Sorby's most popular tools - the multi tip hollowing tool (RS200KT).
Whether starting out or have been turning for years, this tool provides flexibility the woodturner needs to make light work of more specialised projects.
Set includes:
Multi-Tip Hollowing Tool
3/8" Spindle Gouge
3/8" Bowl...
Robert Sorby Sovereign Side Handle
SOV-SH
Sovereign Side Handle (SOV-SH)
The Sovereign Side Handle delivers that extra stability by providing a horizontal screw-in appendage.
The machined knurled pattern provides additional grip.
Robert Sorby Sovereign Spiralling & Texturing Tool Set
TSOV-3370DBS
Sovereign Spiralling & Texturing Tool Set (SOV-3370DBS)
For decorative woodturning, this set is an absolute must! Features both the full size and modular micro systems to deliver a multitude of decorative shapes and patterns.
Set includes unhandled spiralling system, texturing cutter, spiralling cutters 2mm, 4mm and 6mm pitches, unhandled modular micro spiralling tool, 2 micro spiralling...
Robert Sorby Sovereign Tang Collet Adaptor
SOVCOL
Collets for the Sovereign system.
SOV-C06
The SOV-C06 has the narrowest aperture and is suitable for the ¼” Spindle gouge There are also a few tools that require no collet and fit directly into 1/4” shank end of the Sovereign handle. Among these are the 1/2” and 3/4” bowl gouges, the 1/2” fingernail bowl gouge and the extra long multi tip hollowing tool.
SOV-C10
The...
Robert Sorby Sovereign Threaded Coupler
SOV-TC
Sovereign Threaded Coupler (SOV-TC)
For those wanting to join two or more Sovereign handles together we offer a dedicated threaded coupler.
This item is compatible with:
Sovereign 4" Handle Extension (SOV-EXT)
Robert Sorby Six Piece Sovereign Turning Tool Wooden Box Set
SOV-67DBS
This value added box set includes the same tools as the ever popular 67HS but with the benefits afforded by the Sovereign handle and extension – effectively two handle sizes in one.
Robert Sorby Sovereign TurnMaster Set in Wooden Box
SOV-RSTMDBS
Sovereign TurnMaster Set in Wooden Box (SOV-RSTMDBS)
The Robert Sorby TurnMaster is the perfect tool for the beginner or a fantastic foil for the more experienced woodturner looking for a flexible tool to equip their workshop.
This set comes complete with 3 detachable heads to allow for quick interchanging.
Set includes:
TurnMaster shank with HSS detail point cutter fitted
HSS round...
Square Carbide Cutter
SQ15
Cutter Size: 15mm square 2.5mm thick Cutting angle: 35 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Easy Wood Tools - Easy Roughers, Full & Pro (cutter (Ci1) Woodpecker Ultra-Shear FSS & MSS (cutter 20121) Simple Woodturning Tools - Simple Rougher SR
Square Carbide Cutter
SQ102
Cutter Size: 10.5mm square 2mm thick Cutting angle: 35 degree Mounting Countersunk hole: 4mm diameter Suitable for: Rockler Mini Square Tool (cutter S1) Penn State industries Carbide Magic Pen Genie Easy Wood Tools (cutter Ci2)
Square Carbide Cutter
SQ11RA2
Cutter Size: 11mm square with 50mm radius sides and corners 2mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.3mm diameter Suitable for: Easy Wood Tools - Easy Start Rougher, Easy Roughers, Mini & Mid Size Tools (cutter Ci1) Woodpecker Ultra Shear Pen Size Square Tool