Sort By
Per Page
View
Grid
List
SteadyPro Turning System
LRSSTEADYPRO
The Robert Sorby SteadyPro is a very easy to use jig that gives additional tool support when hollowing as well as many other woodturning operations.
The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system. The easy to adjust cantilever action of the clamping rollers, ensures the optimum control for a large selection of...
Midi Multi Tip Hollowing Tool
TRS100KT
All the benefits and attributes of the full size Multi-tipped Hollowing tool (RS200KT) but 2/3 the size, giving access through a much smaller aperture when turning fine hollow forms.Comes with three cutters (RS222, RS111C & RS112C)
Hollowmaster
RS230KT
If even more access under the rim is required then the swan-necked Hollowmaster is an ideal complement to the Multi Tipped Hollowing Tool.
This works on much the same principle.
it has a flat working surface for stability, a hollowing cutter in an adjustable washer and also has an internal scraper cutter.
Cutters are sharpened with a diamond hone.
Full size Hollowmaster is 22" long and midi-size...
Midi Hollowmaster
TRS130KT
Designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example. This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work. Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping on the outside of a bowl. Manufactured...
Multi-Tip Hollowing Tool with 3 Tips
TSOV-RS200
The Multi Tip Hollowing Tool has been in existence for a number of years.It comes complete with three cutters - two for hollowing and a third for scraping.One of the beauties of this tool is that it has a half round shank which enables a full 3/4' to be in contact with the tool rest giving the turner complete control when hollowing.Of the two hollowing tips one is rounded for a flowing shape whilst...
Midi Multi Tip Hollowing Tool with 3 Tips
TSOV-RS100
The Multi Tip Hollowing Tool has been in existence for a number of years.One of the beauties of this tool is that it has a half round shank which enables a full 3/4' to be in contact with the tool rest giving the turner complete control when hollowing.Of the two hollowing tips one is rounded for a flowing shape whilst the other is more pointed and as such is ideal for a crisp corner in a box.They are...
Hollowmaster + 2 Tips
TSOV-RS230
The Hollowmaster is designed to enable the hollowing of vases.Its swan neck shape allows the cutter to access under rims.Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.It comes complete with two cutters - one for hollowing and a second for finishing.
Midi Hollowmaster +2 Tips
TSOV-RS130
The Hollowmaster is designed to enable the hollowing of vases.Its swan neck shape allows the cutter to access under rims.Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.It comes complete with two cutters - one for hollowing and a second for finishing.
Extra Large Multi -Tip Hollowing Tool with 3 Tips
TSOV-RS300
The Multi Tip Hollowing Tool has been in existence for a number of years.It comes complete with three cutters - two for hollowing and a third for scraping.One of the beauties of this tool is that it has a half round shank which enables a full 3/4' to be in contact with the tool rest giving the turner complete control when hollowing.Of the two hollowing tips one is rounded for a flowing shape whilst...
Pro Hogger
ST-PRH
End grain hollowing can be a chore with the high speed steel cutters that come with most hollowing systems. The “Pro-Hogger™” a 3/16 round bar that holds a Hogger 6 shear cup cutter (RD6S1). The system also comes with an adapter and a 10/32 screw. This allows you to retro fit this system to almost all captive hollowing systems. Mounted on a round bar enables the cutter to be rotated to any...
Little Hogger
ST-LH
The “Little Hogger™” uses the latest technology to set the 30 deg angle of the 6mm shear cup cutter. This angle allows for repetitive cuts. This angle produces the smoothest of pull cuts. The “Little Hogger™” is designed to fit most hollowing systems in the market today, including the Robert Sorby Multi Tip Hollowing Tools RS200KT and RS230KT.
The kit includes:
3/16...
6mm Shear Cup Carbide Cutter
RDS61
6mm diameter Shear Cup Cutter suitable for the Pro-Hogger and Little Hogger 2.35mm thick 7' cutter angle Also suitable for: Osprey #1 Hercules Hunter Tools Jackosky Hollow pro Rocket JT Tools Hunter Retrofit Jimmy Clewes Mate 1
Sovereign Hollowing Starter Set
SOV-RS200DBS
This set focuses on one of Robert Sorby's most popular tools - the multi tip hollowing tool (RS200KT).
Whether starting out or have been turning for years, this tool provides flexibility the woodturner needs to make light work of more specialised projects.
Set includes
Multi-Tip Hollowing Tool
3/8" Spindle Gouge
3/8" Bowl Gouge
3/4" Spindle Roughing Gouge
1/4"...
Midi Round Tip
TRS111C
The Robert Sorby Midi Round Tip cutter provides an excellent choice for removing waste material quickly and efficiently, especially when undercutting on smaller projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Perfect for the smaller piece. Related Products:...
Midi Point Tip
TRS112C
The Robert Sorby Midi Point Tip cutter provides an excellent choice for creating parallel sides on small boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. Designed for the Midi Multi-tip Hollowing Tool this cutter is great for the smaller project. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best...
HSS Scraper Blade - Rs2000
TRS222
The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports...
Excelsior Scraper Blade
TRS222G
The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports...
Medium Tear Drop Cutter
TRS200C
The Robert Sorby medium tear drop cutter, like its big brother (Large Teardrop RS213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved...
Excelsior Medium Tear Drop Cutter
TRS200GC
The Robert Sorby Excelsior medium tear drop cutter provides a multi-facetted, highly efficient cutting edge in a durable coating. As with all teardrop cutters, the shape effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved...
Round End Swivel Tip
TRS211C
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting. A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below) This cutter is also available in Robert Sorby's Excelsior (titanium nitride coated high speed steel) series. Sharpening: Use a diamond file or honing stone...
Excelsior Round End Swivel Tip
TRS211GC
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting and with added wear resistance of its TIN coating. A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below). This cutter is also available in high speed steel. Sharpening: Use a diamond file or honing stone around...
Side/End Cut Swivel Tip
TRS212C
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. This cutter is also available in Robert Sorby's Excelsior (titanium nitride coated high speed steel) series. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and...
Excelsior Side/End Swivel Tip
TRS212GC
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. TIN coating provides additional wear resistance increasing the lifetime of the cutter. This cutter is also available in high speed steel Sharpening: Use a diamond file or honing stone around the profile of...
Bullet Cutter
RS232C
The Robert Sorby Bullet Cutter is designed for the rapid removal of waste material when using either of two popular tools the Swan Neck and Swivel Tip tools. Used in combination with the Ball End Cutter (RS233C) for developing hollow forms. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should...
Ball End Cutter
RS233C
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4' and 1/2' and is one of two beading cutters available for this tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter...
Recess Cutter
TRS234C
The Robert Sorby Recess and Dovetail cutter is an excellent addition to the Robert Sorby Multi-tip Hollowing Tool and is the perfect tool for job when creating recesses and dovetails at 40 and 60? . Ideal as the foot on a bowl for gripping in the chuck jaws. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple...
Round Cutter
TRS130C
The Robert Sorby Midi Round Cutter is the perfect circular cutter for all general purpose turning. An incredible all rounder this cutter provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Midi Hollowmaster the tool it was designed for and for delivering those scraping finishing cuts on smaller hollow forms....
Round Scraper Tip
TRS230C
The Robert Sorby Full Round Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Hollowmaster the tool it was designed for and for delivering those...
Excelsior Round Scraper Tip
TRS230GC
The Robert Sorby Full Round Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Hollowmaster the tool it was designed for and for delivering those...
Shallow Hollowing 14"
B850001
850H Shallow Hollowing 14" Tool
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. The smallest (850H) is designed to work through the narrowest of apertures, down to as small as 3/8" (10mm).
Medium Hollowing Tool
851H
More exaggerated swan neck and thicker shaft that the 850H.Has a replaceable tip (ref 851C).Min aperture: 1/2'Max depth: 5'
Swan Neck Hollowing Tool 20"
B855003
855H Swan Neck Hollowing Tool
A very versatile, general purpose hollower.
Ideal for under-cutting.
Fitted with a replaceable HSS tip (851C).
Min aperture: 1/2"
Max depth: 6"
Swan Neck Hollowing Tool 24"
B859004
Swan Neck Hollowing Tool 24" 859H
The individual shape of these tools makes them suitable for blind turning or under cutting here reach is restricted. The 14" version (851H) is designed for end grain use on shallower depth projects whilst the slightly larger model (855H) allows for greater reach.
The 24" version (859H) is produced from a more substantial section steel, and is more...
Depth Stop for Boring Tool
853
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. The boring bar and depth stop (852H and 853) form an ideal method of quickly opening up a vessel to provide both entry opening and final hollowing depth. Photo shows 853 fitted onto a tool.
General Purpose Cutter
851C
The Robert Sorby General Purpose Cutter is a small cutter designed for the removal of waste material when using the smaller Swan Neck and Swivel Tip probe tools. Ideal for end grain use on shallower depth projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often....
Micro Straight Tool HSS
B87606W
This narrow ornamental tool is ideal for creating apertures in miniature vases or for straight hollowing. Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
Micro Cranked Tool 3/16"
B87706W
The cranked tool is ideal for taking the undercuts required in miniature hollowing work. Use in combination with the Hook tool to create some unbelievably small hollow forms. Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
Micro Hook Tool 3/16"
B87806W
This narrow ornamental tool is ideal for creating apertures in miniature vases or for straight hollowing. Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
Three Piece Micro Hollow/Ornamental Set
A38HS3T
This set of micro turning tools has been specifically designed for miniature hollowing.
Hollowing Tool 3/16"
873
Ideal for miniature projects, Christmas ornaments.Sharpen with a diamond hone.Min aperture: 1/4'Max depth: 1.1/2'
Modular Micro Boring
888-6
As the name suggests this tools is designed for boring out apertures and for straight hollowing on small projects.
Modular Micro Swan Neck
888-7
A great tool for developing the undercut and taking the hollowing shape to the next level. Excellent for developing small hollow forms such as small vases and egg cups.
Three Piece Modular Micro Hollowing Set
A87HS3T
This modular hollowing set is a great starter set for those wanting to experiment with hollowing forms in miniature.
Three Piece Modular Micro Spindle HSS Set
A88HS3T
Specially designed as an introductory set for micro spindle turning
Medium Ultima System
TSOV22S-ULTM
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.It is equally effective on bowl grain work as well as end-grain project.The Ultima is available in two sizes.The systems come fitted to the Sovereign interchangeable handle.Each Sovereign Ultima comes...
Small Ultima System
TSOV16S-ULTS
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.It is equally effective on bowl grain work as well as end-grain project.The Ultima is available in two sizes.The systems come fitted to the Sovereign interchangeable handle.Each Sovereign Ultima comes...
Small Ultima Unhandled
TSOV-RSULTS
For those who already own a Sovereign handle we do supply just the blades on their own.The smaller blade with 1/2' diameter shaft measures 13' overall.The medium blade has a 5/8' shaft and measures 18' overall.