Hollowing Tools: Page 2

Ultima Cutter (SOV-ULTCUT) The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms. It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool. The titanium nitride version of the cutter adds wear resistance and so increases...

Ultima Cutter Sharp Jig (SOV-ULTCSJ) To make sharpening quick and convenient there is also a dedicated sharpening jig. The main section is made from phosphor bronze which allows it to rotate freely within the sleeve. This means it can be used either with a diamond file, bench grinder of ProEdge. It will also man other full round cutters.

Small Ultima Link (SOV-ULTLS) Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber. The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal. Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel. The...

Ultima Head without cutter (SOV-ULTMHEAD) The Sovereign Ultima hollowing system uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal. Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel. The multi- variable configuration head and link system allows the tool to be used in a variety of...

Reversible Hooker (RS210) The Hooker is designed as a safe method of hollowing vessels through narrow openings. It comes fitted with a scraper cutter (RS222) for finishing but also takes the swivel assembly and hollowing tips (RS211C and RS212C). Its design allows for both inboard and outboard turning. It should be fitted to the Main Handle (RS202) and Side Handle (RS203) or alternatively...

Square/Pointed Cutter (RS220) One of two double ended chattertool cutters that will produce a myriad of decorative patterns. Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre. To be produced on end grain only. Sharpening: Use a diamond...

Diamond Sharpening File (RS224) The Diamond Sharpening File is an ideal accessory for sharpening replaceable tool tips by hand. This tool can also be used on knives, scissors, even tungsten carbide router bits. For maximum life use water during use.

Cove Cutter (RS23) The Robert Sorby Cove Cutter is one of five additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed...

Multi-Tip Hollowing Tool (RS200KT) A most versatile hollowing tool. Ideal for end and side grain. Will under-cut rims. Includes a scraper blade for half round, shallow and flat work as well as shear scraping. New beading and coving cutters can also be fitted. Includes use and sharpening instructions.